Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Roofing: The Woodland Hills Owner’s Guide
If you have a Tremron roofing product that’s failing, we stock compatible replacement parts and install them across Woodland Hills, typically at an installed cost of $400 to $1,800 depending on the scope of the repair. Most Tremron roofing issues we see involve cracked tiles, failed underlayment, or damaged flashing rather than a single universal “part” – which means the right fix starts with correctly identifying what’s actually broken. Homeowners usually discover the problem two ways: a visible crack or missing tile after a windstorm, or a water stain on the ceiling that traces back to a slow leak somewhere above.
We’re an independent service provider, not affiliated with Tremron directly. What that means for you: we work on Tremron products every season, we know what fails and why, and we’ll tell you straight whether a repair makes sense or whether you’re better off replacing the section entirely. Isaac Pruett grew up in Los Angeles and spent years working roofs across the Valley, including a lot of time around Warner Center and the surrounding Woodland Hills neighborhoods. He’s seen how Tremron concrete tiles hold up in our dry heat and Santa Ana winds, and he’s honest about what that means for your roof’s lifespan.
Which Tremron Models This Applies To
Tremron manufactures concrete roof tile in several profiles sold through builders and roofing supply yards across Southern California, including the flat, low-profile “shake” and “slate” styles you’ll see on many Woodland Hills homes built from the 1980s through the early 2000s. The most common Tremron tile lines we encounter are their standard-weight concrete tiles, which measure roughly 16 to 17 inches long by 12 to 13 inches wide per tile, with a weight of about 9 to 11 pounds per square foot once installed. That weight matters: if your roof structure wasn’t engineered for concrete tile, any replacement work has to account for it.
Here’s the compatibility gotcha most homeowners run into: Tremron tiles from different production runs and different decades aren’t always interchangeable by dimension alone. The tile’s profile, water channels on the underside, and the lugs that hook onto the batten all need to match, and sometimes a tile that “looks identical” to the naked eye sits differently. We match by taking a broken tile sample, measuring the profile against current and legacy Tremron specs, and confirming the interlock before we’d ever put it on your roof. When an exact OEM Tremron tile isn’t available, we’ll show you a quality aftermarket equivalent that matches the profile and color blend, and we’ll tell you the price difference before any work starts.
Styles & brands we work with
Signs Your Tremron Roofing Is Failing
- Visible cracks or spalling on individual tiles. Concrete tile absorbs a tiny amount of moisture, and after decades of Woodland Hills sun exposure with cool damp winters, the surface can start to flake or crack. One or two cracked tiles is a repair job. A roof where 20% or more of the tiles show this is a replacement conversation.
- Tiles slipping out of place after wind. The lugs or nails that hold each tile to the batten can corrode or fail. If you’re seeing tiles in your yard after a Santa Ana event, the fastening system is giving out, and leaving the underlayment exposed means every week that passes invites water damage.
- Dark stains on ceilings or walls below the roof. Water entering around a failed tile or flashing channels along the underlayment and can travel surprisingly far before it shows up inside your home. By the time you see the stain, the leak has usually been active for weeks or longer.
- Granules or concrete dust in your gutters. This is the tile surface slowly eroding. A little dust after a repair is normal, but a steady accumulation means the tiles themselves are reaching the end of their serviceable life.
- Flashing lifting or separating around chimneys and vents. The metal flashing where your roof meets vertical surfaces takes the most movement stress. When the seal breaks, that’s a $400 to $800 fix if caught early, and a much larger repair if water has been getting in for a season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Woodland Hills, roof repair on a Tremron tile roof runs $400 to $1,800 installed, with most single-issue repairs – a cracked tile, a small flashing failure, a localized underlayment patch – landing between $450 and $900. Full roof replacement on a Tremron tile roof sits in the $8,000 to $20,000 range depending on square footage, roof pitch, and how much of the existing underlayment and battens need to be rebuilt.
What drives the price up on a repair: how many tiles need to be removed and reset to reach the problem, whether the underlayment beneath is deteriorated, and whether your roof is steep enough to require special staging. We give a written price before any work starts, and that’s the price you pay – no verbal estimate that grows after we open things up. Every repair is covered by our 365-Day Done Right Promise: if the work isn’t right within a year of completion, we come back and make it right at no cost to you. We also carry liability insurance and workers’ comp, which matters on a job where people are walking around on your roof.
DIY or Call Us?
You can safely inspect a tile roof from the ground with binoculars: look for missing tiles, shifted tiles, and flashing that’s pulling away. You can also safely clear your gutters and note whether you’re seeing tile granules. What you should not do is walk a concrete tile roof yourself. Tile is brittle, the surface is uneven, and one wrong step cracks the tile you’re standing on and sets up your next leak. Falls from roofs put people in emergency rooms every year in this part of Los Angeles County, and the risk is never worth the couple hundred dollars a repair might save.
If you’ve spotted something that concerns you, call us at (831) 290-6866. We’ll come out, do a proper inspection, and give you a written price for exactly what needs to be done. No pressure, no obligation, and you’ll know the real number before you decide anything.
FAQs
A properly installed Tremron concrete tile roof in our climate typically lasts 35 to 50 years, though the underlayment beneath the tiles often needs replacement at the 25 to 30-year mark because it degrades faster than the tile itself. If your home is approaching that age, call us at (831) 290-6866 for an honest assessment of what’s left and what’s not – the estimate is free.
Individual cracked tiles can sometimes be sealed with a concrete patch or sealant if the crack is hairline and hasn’t compromised the tile’s interlock, but most cracked tiles we see in Woodland Hills are better replaced than patched. A replacement tile removes the failure point entirely, and matched replacements are usually available. Call (831) 290-6866 and we’ll tell you which route makes sense for your specific situation.
Most single-issue repairs on a Tremron roof – cracked tile replacement, flashing reseal, or a small underlayment patch – take 2 to 4 hours once we’re on site. Larger repairs involving tile removal and reset across a whole section can take a full day, and we’ll tell you the timeline in writing before we start. For a specific timeline on your repair, call (831) 290-6866.
We keep common Tremron-compatible tile profiles, flashing materials, underlayment, and fasteners in stock and on our trucks for most Woodland Hills service calls, which means many repairs are completed in a single visit. If your specific tile profile needs to be ordered, we’ll tell you exactly how long that takes before you commit to anything. Call (831) 290-6866 and we’ll check availability for your exact match.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Woodland Hills, CA at Mason Remodeling Co Woodland Hills, serving Woodland Hills and nearby areas.
