Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Fence Installation: The Woodland Hills Owner’s Guide
We install Therma-Tru-compatible fence systems throughout Woodland Hills and typically complete most replacements in one to two days once parts are on hand. Installed pricing for a full Therma-Tru fence in Woodland Hills runs between $3,500 and $9,000 depending on linear footage, post condition, and whether we’re replacing panels only or setting new posts. Most owners discover their fence has failed the hard way: a gate post has shifted after a winter rain, a panel split along the bottom rail, or the locking mechanism no longer catches because the frame has sagged out of square.
Therma-Tru is a door manufacturer first, but its composite fence components show up often in Woodland Hills yards, particularly in neighborhoods around Warner Center and the older pockets south of Ventura Boulevard where fencing from the early 2000s is reaching the end of its service life. We’re an independent service provider, not affiliated with Therma-Tru, which means we can source OEM parts when they’re still manufactured or match with quality aftermarket equivalents when they’re not.
Which Therma-Tru Models This Applies To
Therma-Tru fence systems fall into a few recognizable series depending on the era they were installed. The most common in Woodland Hills are the composite privacy fence panels with a wood-grain texture on one side and a smooth face on the other, usually in 6-foot by 6-foot or 6-foot by 8-foot panel dimensions. We also see the ranch-rail style used on larger lots in the hills above Ventura Boulevard.
The practical compatibility issue with Therma-Tru fencing is the post sleeve profile. Therma-Tru’s composite post sleeves measure 5×5 inches outside dimension with a 4×4 wood or steel insert, and that 5×5 sleeve is not interchangeable with the 4×4 or 5×5 sleeves from other manufacturers. The panel tongues also differ. If you’re replacing just a panel or two, matching the original Therma-Tru tongue profile matters more than the brand stamped on the new part. We carry aftermarket panels with matching tongue profiles for the common Therma-Tru series and can confirm fit by measuring the existing panel’s tongue depth and spacing. For post replacement, we often use the original Therma-Tru sleeve when it’s still stocked; when it isn’t, we’ve had good results trimming and shimming an aftermarket 5×5 sleeve to the original rail height. One gotcha worth knowing: the bottom rail on older Therma-Tru panels is notched for drainage, and the notch orientation is left/right specific. Installing a replacement panel flipped the wrong way traps water against the wood-grain face and shortens panel life. We check that every time.
Styles & brands we work with
Signs Your Therma-Tru Fence Installation Is Failing
- Gate post lean or sag. This is the failure we see most in Woodland Hills, usually after wet winters when clay-heavy soil around the post expands and contracts. The post wasn’t set deep enough for the soil type, and the gate’s weight pulls it out of plumb over time.
- Panel separation at the tongue-and-groove seam. Therma-Tru panels lock together with a tongue profile, and when a post shifts even a half inch, the seam opens. What starts as a visible gap becomes a panel that rattles in wind and eventually splits the tongue.
- Bottom rail rot or crumbling at ground contact. In Woodland Hills’ dry summers, irrigation overspray keeps the bottom rail damp, and the composite material degrades faster when it cycles between wet and 100-degree heat. If you see flaking or soft spots at the bottom edge of the rail, the panel is compromised.
- Gate latch no longer lines up. When the frame drops or the hinge post rotates, the latch bolt misses the strike plate. Homeowners often adjust the latch instead of fixing the structure, which digs the hole deeper.
- White chalky residue on the panel face. This is UV oxidation at the surface level. It’s cosmetic and often cleanable, but on older Therma-Tru panels it can signal the protective cap layer has worn thin and the core is exposed to moisture.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Woodland Hills fence replacement prices follow a predictable pattern. A basic panel swap on existing sound posts runs $3,500 to $5,000 for an average 60- to 80-foot yard. If we’re pulling and resetting posts, expect $5,500 to $7,500. Full tear-out with new posts, rails, panels, and gate hardware lands between $7,000 and $9,000 for most properties in the flatlands; homes in the hills with long runs or difficult access can push that higher.
Every quote is a written, line-item price before work starts. That price covers removal and disposal of the old fence, setting new posts in concrete where called for, installation labor, and matching hardware. We don’t leave verbal half-estimates or “we’ll see how it goes” pricing. The written guarantee runs 365 days from the completion date, and if something we installed isn’t right within that year, we return and make it right at no charge. Isaac Pruett has been pricing fence and structure work this way since he started in the trade, and he’s not interested in changing it.
DIY or Call Us?
There are things on a Therma-Tru fence you can safely check yourself: walk the line and look for posts out of plumb, note which panels are separating, and test the gate swing. Knowing which panel is bad and which post is moving helps you price the job accurately when you call.
Where DIY gets costly is the post setting. A fence post in Woodland Hills needs to go 24 to 30 inches deep depending on soil, and in the clay-heavy ground south of the Boulevard, a shallow-set post will move within two seasons. Gate posts need even deeper footings with more concrete. If you’re replacing a panel on a failing post, you’re paying twice. For anything structural, call us at (831) 290-6866 before you dig. We’ll tell you what you’re actually up against and what it costs, no obligation.
FAQs
A properly installed Therma-Tru fence in Woodland Hills typically lasts 15 to 20 years on well-set posts, with the panels outlasting the post footings in most cases. Call (831) 290-6866 and we’ll assess your exact fence condition.
Surface scratches and light oxidation can be cleaned or touched up, but structural damage like a split tongue, cracked rail, or water-damaged core means replacement, because composite panels can’t be sanded and re-textured like wood. For a straight answer on yours, call (831) 290-6866.
Most panel swaps and gate resets are finished in one day if posts are sound, and a full fence replacement in Woodland Hills usually takes two to three days including concrete cure time for new posts. We’ll give you a firm timeline in writing before we start.
We keep common Therma-Tru tongue-profile panels, post sleeves, and gate hardware on hand for same-week installation, and we order series-specific components as needed, usually with a two to five day lead time in Woodland Hills. Call (831) 290-6866 and we’ll confirm availability for your model.
If your Therma-Tru fence is failing in Woodland Hills, call (831) 290-6866 for a free estimate. Isaac will tell you what needs to happen, what it costs in writing, and when we can get it done. We also stock and install components for KraftMaid cabinetry, Cambria and Silestone surfaces when fence work turns into a bigger project.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Woodland Hills, CA at Mason Remodeling Co Woodland Hills, serving Woodland Hills and nearby areas.
