Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Driveway & Pavers: The Woodland Hills Owner’s Guide
Schluter does not manufacture driveway surfaces or pavers. If you’re searching for “Schluter driveway & pavers,” you’ve almost certainly got a Schluter product adjacent to your driveway or paver patio that’s failing, and the real repair sits where tile, stone, or drainage meets the hardscape. In Woodland Hills, we regularly see this on paver patios abutting the house where a Schluter drainage channel or edging profile has pulled loose, and on driveways where Schluter’s exterior uncoupling membrane under tile walkways has cracked after years of San Fernando Valley heat. Typical installed repairs in Woodland Hills run $400 – $1,800 depending on the Schluter component, and we keep the common Schluter trim profiles and drainage parts on the truck for same-week fixes. You’ll usually notice it as a lifted metal edge, water pooling against the foundation, or tile that’s cracked right where the driveway or paver line ends.
Which Schluter Models This Applies To
Three Schluter product lines show up repeatedly on Woodland Hills driveways and paver installations: Schluter-BARA edge profiles (the metal trim that finishes tile edges at driveway thresholds), Schluter-TROBA drainage mats (the dimpled membrane under exterior tile and stone that moves water away), and Schluter-KERDI-BOARD when it’s been used as a backing board behind an exterior paver or stone veneer wall. The quick way to identify your part: Schluter aluminum profiles carry a stamped product code on the underside of the flange, while TROBA mats have the name embossed directly into the dimples. Compatibility matters here. BARA profiles come in different heights to match tile thickness, and a BARA-RT is not a drop-in for a BARA-RK when you’re dealing with a driveway-to-paver transition. Matching OEM Schluter parts is usually the right call: aftermarket aluminum trim often lacks the same corrosion resistance, and in a climate with both intense sun and occasional heavy rain like we get in Woodland Hills, cheaper trim oxidizes and fails in three to five years. Mason Remodeling Co Woodland Hills is an independent service provider and not affiliated with Schluter, but we order direct from Schluter distribution so the part in your hand is the genuine profile, not a lookalike.
Styles & brands we work with
Signs Your Schluter Driveway & Pavers Is Failing
- Lifted or curled metal edging along the driveway threshold. The Schluter profile has separated from its mortar bed, usually because movement in the concrete slab below transferred up through the tile. Once it lifts even an eighth of an inch, water gets underneath and the failure accelerates.
- Water pooling against the foundation or garage door after rain. This is almost always a TROBA drainage mat that’s been crushed, clogged, or improperly terminated. In Woodland Hills, where we go months without rain and then get heavy downpours, this shows up as a damp ring at the base of the garage wall after a storm.
- Tile cracking in a straight line at the edge of a paver patio. The Schluter movement joint profile has lost its bond and the two hard surfaces are now fighting each other. The crack is typically straight and runs parallel to the paver edge.
- Discolored or chalky white residue on the metal trim. Aluminum oxidation under UV exposure. Hairline surface corrosion isn’t structural, but if the profile is pitted through, it needs replacement before water reaches the substrate.
- Hollow sound when walking on the tile at the driveway edge. The uncoupling membrane has debonded from the concrete below. You’re hearing the void that now exists between tile and slab.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Woodland Hills, Schluter profile and drainage replacement work typically runs $400 – $1,800 installed, depending on the length of the run, the condition of the surrounding tile or stone, and whether we’re replacing the trim only or pulling up tile to redo the membrane underneath. A simple BARA edge profile replacement on a short paver transition might land near the bottom of that range. A TROBA drainage failure that requires removing and reinstalling exterior tile climbs toward the top. The price includes the Schluter part, mortar, waterproofing touches, labor, and a written line-item quote before any work starts, so you know exactly what you’re paying and there are no change orders. Our work carries a 365-day guarantee from the completion date: if it’s not right within a year, we make it right at no cost to you. Call (831) 290-6866 for an exact quote. Isaac Pruett says it plainly: “Tell me what you need done. I’ll tell you what it takes and what it costs. Then we get to work.”
DIY or Call Us?
Replacing a Schluter trim profile or drainage mat isn’t inherently dangerous, but it’s fussy work where a small mistake means ripping out tile twice. What you can safely check: whether the Schluter part is stamped with a product code, how long the failed run is, and whether surrounding tile or pavers are still firmly set. What goes wrong with DIY: cutting a BARA profile to the wrong height, bedding it in the wrong mortar, or incorrectly lapping a TROBA mat so water runs under the tile instead of away from the foundation. These are the calls we make daily. If you’re in Woodland Hills and you’d rather not redo this twice, call (831) 290-6866. We’ll match the part, bring it to the door, and price the job before we start.
FAQs
A properly installed Schluter BARA profile or TROBA drainage mat typically lasts 15 to 25 years in Woodland Hills, but failure at 8 to 12 years is common when the original install cut corners on mortar coverage or slope. The San Fernando Valley’s temperature swings and occasional flash rains mean a bad install shows its flaws within the first decade.
If the profile is only slightly lifted and the metal is intact, we can often rebed it in fresh mortar and restore the bond, which is a smaller repair, usually in the $400 to $700 range. If the aluminum is bent, pitted, or the anchoring leg has sheared, replacement is the only fix that lasts. Call (831) 290-6866 and we’ll look at it before recommending either path.
Most profile and drainage mat replacements finish in a single day, including cleanup and setting time for the mortar. If tile has to be pulled and reinstalled to reach the membrane, expect two to three days.
We stock the common Schluter BARA, TROBA, and KERDI-BOARD profiles and mats used on Woodland Hills driveways and paver work, so most repairs start the same week. For less common sizes or finish colors, we order direct from Schluter distribution with arrival in a few days. We also stock and install parts for KraftMaid, Cambria, and Silestone products for interior work.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Woodland Hills, CA at Mason Remodeling Co Woodland Hills, serving Woodland Hills and nearby areas.
