Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Roofing: The Woodland Hills Owner’s Guide
KraftMaid doesn’t manufacture roofing materials, so if you’re searching for “KraftMaid roofing parts,” what you likely have is a KraftMaid cabinetry component, trim piece, hinge, or hardware that’s failing in a kitchen, bath, or outdoor kitchen that happens to sit under or near your roofline. We stock and install KraftMaid-compatible replacement parts throughout Woodland Hills, with most cabinet hardware and trim swaps running $150 – $600 installed. The call usually comes in after a hinge snaps, a drawer slide gives out, or a crown molding piece separates at the seam where wall meets ceiling, and water staining from a past roof leak has warped the finish.
Here’s the honest picture: if your actual roof is leaking, that’s a roof repair, and our crew handles that too. But if the KraftMaid label is on a cabinet, vanity, pantry unit, or built-in that’s showing age, this page tells you exactly what to check, what it costs, and how fast we can make it right.
Which KraftMaid Models This Applies To
KraftMaid builds cabinetry lines under several series names, including Vantage, Venicia, and their standard all-plywood construction line sold through big-box retailers and independent kitchen dealers. The parts we most often replace in Woodland Hills homes are hinges (typically 35mm European-style cup hinges), soft-close drawer slides (usually 22-inch or 16-inch undermount styles), door bumpers, shelf pins, and the occasional adjustable leg or toe-kick clip. The gotcha we see repeatedly: KraftMaid switched hinge suppliers at least twice over the past decade, so two cabinets in the same kitchen from the same original order can have different screw hole patterns. We measure before we order, every time. Look for the KraftMaid stamp on the inside of the drawer box or the hinge side of the cabinet door. A model number will start with “KM” followed by a series code. If the label is gone, we identify the hardware by its spacing, bore diameter, and throw pattern, which takes a few minutes on site and costs you nothing extra.
For OEM KraftMaid parts, lead times run two to three weeks depending on the series. Quality aftermarket equivalents from Blum, Salice, and Grass often fit the same bore and mounting pattern, cost 30 – 50% less, and carry the same or better duty rating. We present both options with prices in writing before any work starts.
Styles & brands we work with
Signs Your KraftMaid Roofing Is Failing
Here’s what homeowners in Woodland Hills tell us when they call about failing KraftMaid cabinetry or trim. We define “failing” by what the part is doing, not what it looks like, because function fails before finish does.
- The door drops when you open it. Hinge wear. The cup hinge’s spring mechanism loses tension after 15,000 – 20,000 open-close cycles, which most Woodland Hills kitchens hit in 6 – 9 years. A single worn hinge drags the door down, then the second hinge starts binding, and the shearing force eventually splinters the screw holes.
- The drawer closes too fast or slams at the last inch. Failed soft-close damper. KraftMaid’s undermount slides have a small plastic damper piston that cracks with age and heat cycling. Woodland Hills summers, especially in rooms without air conditioning running all day, accelerate plastic fatigue.
- The drawer sits crooked and scrapes the face frame. One slide has jumped its track or the mounting clip is broken. The roller cage inside the slide wears unevenly, usually on the heavier utensil drawer or a lower cabinet used for pots.
- You see a hairline gap between the crown molding and the ceiling. The wall or ceiling moved. Woodland Hills sits on expansive clay soil, and the dry-wet-dry seasonal cycle shifts framing by a quarter inch over a decade. The cabinet stays put, the house moves, and the trim seam opens. New caulk fails within a year unless the molding is re-secured first.
- Water staining or finish blistering above the cabinet run. This is the one that connects roofing and cabinetry. A leak at a roof penetration, valley, or flashing point above a kitchen or bath shows up as raised grain, white haze, or peeling finish on the upper cabinet. The cabinet is the symptom. The roof is the problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Woodland Hills, KraftMaid-compatible cabinet hardware replacement runs $150 – $600 for the typical job: hinge swaps, slide replacement, bumper and pin replacement, door adjustments. If we’re replacing trim, crown molding, or a single cabinet face panel, that lands between $650 and $2,500 depending on species, finish matching, and whether we’re retrofitting for soft-close. Roof repair runs $400 – $1,800 for a typical leak, and full roof replacement in Woodland Hills runs $8,000 – $20,000 depending on pitch, layers, and material. The range is driven by access, not complexity: a two-story home with a steep pitch costs more than a single-story ranch with a walkable roof.
Every quote includes the part cost, the labor, the fasteners, the finish touch-up, and the disposal of the old hardware. No line-item surprises after the fact. The workmanship warranty is 365 days from completion: if a hinge binds, a slide sticks, or a trim seam opens in that first year, we come back and make it right at no charge. Isaac Pruett signs off on the final walkthrough himself.
DIY or Call Us?
You can safely check two things before calling. First, look inside the cabinet for the KraftMaid stamp and note the model number. Second, count how many doors or drawers show the problem. That’s it. After that, the honest advice from a crew that’s done this across the Valley: leave the hinge and slide work to someone with the right jig and the right parts. Drilling a 35mm bore freehand cracks the door. Swapping an undermount slide without the right clip alignment turns a $40 part into a $300 door replacement. And roof work, even a “simple” leak check, means standing on a pitch where one wrong step ends a working career. We carry fall protection, the right ladders, and the insurance that covers the risk.
If you’re not sure whether the problem is the cabinet or the roof, call (831) 290-6866. We’ll send a background-checked, uniformed technician with a photo ID badge, and you’ll know the name and face before they ring the bell.
FAQs
Plan on 8 – 12 years for hinges and 10 – 15 years for slides in Woodland Hills, where dry heat cycles and occasional humidity swings shorten plastic damper life compared to coastal climates. Heavily used drawers under a cooktop fail first.
In most cases no. Cup hinge springs and damper pistons are sealed units. Adjusting the mounting screws can buy you a few months if the door is just misaligned, but once the spring tension is gone, replacement is the fix. Call (831) 290-6866 and we’ll tell you straight what’s salvageable.
Our crew handles a full kitchen of hinge and slide replacement in one visit, typically 2 – 4 hours depending on cabinet count. We bring the common KraftMaid-compatible hardware on the truck and order specialty pieces beforehand based on photos you send us.
We keep the common 35mm cup hinges, soft-close slides, bumpers, and shelf pins on the truck. For less common series-specific trim or an exact OEM match, we source from KraftMaid’s distribution network. We also stock compatible hardware from Blum, Salice, and Grass, and handle parts for Cambria, Silestone, and Kohler surfaces that surround the cabinetry. If it’s tied to a roofing leak above your KraftMaid kitchen, we fix the roof and the cabinet in one scope of work.
Tell me what you need done. I’ll tell you what it takes and what it costs. Then we get to work. Call (831) 290-6866 for a free estimate, or to ask Isaac Pruett directly about what you’re seeing in your Woodland Hills home.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Woodland Hills, CA at Mason Remodeling Co Woodland Hills, serving Woodland Hills and nearby areas.
