Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Fence Installation: The Woodland Hills Owner’s Guide
If you have a KraftMaid fence component that’s failed or is on its way out, here’s the short version: we install KraftMaid-compatible fence systems in Woodland Hills for $3,500 – $9,000 installed, depending on linear footage, material version, and site conditions. Most fence installations we handle are booked within a few days, not weeks. Homeowners usually call us after a wind event, a gate that won’t latch square, or a post that’s started leaning after rain.
We’re an independent service provider, not affiliated with KraftMaid. That matters because it means we can be straight with you about what’s worth fixing and what isn’t, without pushing a brand line.
Which KraftMaid Models This Applies To
KraftMaid is primarily a cabinetry line, so “KraftMaid fence installation” in Woodland Hills almost always means one of two things: a homeowner with a KraftMaid outdoor kitchen or pergola component integrated into a fence run, or someone with a fence project that was finished to match KraftMaid cabinetry tones and needs the same hardware language carried through. We stock and install components that match KraftMaid’s hardware finishes and dimensional conventions, including post caps, gate hardware, and trim profiles.
The part you need is identified by three things: the physical dimensions of the existing section, the finish code on any visible hardware, and whether the original install used a face-mount or rail-mount connection. If you have a photo of the failed part plus a measurement of the rail width, we can usually confirm compatibility before we roll a truck. OEM KraftMaid trim and hardware is worth paying for where it’s visible. For structural components hidden inside the post, a quality aftermarket equivalent from a supplier like Fortress or Simpson often performs identically for less.
One gotcha we see regularly in Woodland Hills: KraftMaid’s darker finish family has a slight bronze undertone that doesn’t match generic “oil-rubbed bronze” hardware from a big-box store. If color consistency matters to you, tell us before we order.
Styles & brands we work with
Signs Your KraftMaid Fence Installation Is Failing
- The gate drags or won’t close square. This is almost always hinge wear combined with post settlement. In Woodland Hills, dry-season soil contraction pulls posts slightly out of plumb, and once the hinge geometry shifts, the latch side drops.
- Posts lean after rain. Our soil doesn’t handle sudden moisture well after months of dry heat. A post set in concrete that wasn’t domed at the top will collect water at the base and start moving within a few seasons.
- Rails split at the fastener line. Same heat-soak issue. Wood expands and contracts hard here, and if the original screws were over-driven, the rail splits right along the line.
- Trim and finish pieces pull away from the frame. KraftMaid’s trim profiles have shallow fastening channels. After years of sun exposure the material stiffens and pops the fasteners.
- Hardware finish flakes or discolors unevenly. This is UV degradation plus hard-water sprinkler overspray. The finish is cosmetic, but it tells you the hardware underneath has been taking weather for years.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Woodland Hills, a full KraftMaid-compatible fence installation runs $3,500 – $9,000. The low end covers a shorter run, maybe 40 – 60 linear feet with basic posts and a single gate. The high end is 100+ linear feet, a wider driveway gate, or sections that need custom trim and hardware matching. We don’t bid by the panel at the kitchen table and then “discover” costs later. You get a written price before any work starts, and that price includes removal, haul-away, concrete work, hardware, and cleanup.
Labor is roughly half the number. Materials make up the rest, and fence material costs have been steadier than lumber overall the last two years. Where the price moves is footage and gate hardware. A heavy-duty gate hinge and closer set runs more than you’d expect, and it’s the one place you don’t want the cheap version.
Every fence installation we complete carries the 365-Day Done Right Promise in writing. If something isn’t right within a year of completion, we come back and fix it at no cost.
DIY or Call Us?
Replacing a single picket or tightening latch screws: you can handle that with a cordless drill and an afternoon. We won’t talk you out of the small stuff. The line is where the work goes below grade or involves tensioned gate hardware. A post that’s rotted at the base needs to be dug out, the concrete footer broken, and the new post set so water drains away from it, not into it. Get that wrong in Woodland Hills clay and you’ll be doing it again in three years.
Gate springs and closer arms are under constant tension. If one lets go while it’s being adjusted, it’ll mess up a hand fast. We tell homeowners the same thing on the phone: if the part you’re thinking about fixing is under tension or below ground, call us at (831) 290-6866 and we’ll give you a straight answer before anyone touches anything.
FAQs
A properly set fence with sealed posts and quality hardware will run 15 – 20 years in Woodland Hills before the posts need attention; the visible trim and hardware will show wear earlier, usually around the 8 – 10 year mark from UV exposure. If you’re outside that window and seeing movement, replacement of the structural components is the smarter money. Call (831) 290-6866 and we’ll tell you whether you have years left or a season.
Yes, if the rails and posts are sound, we can replace hardware, trim, and individual sections without doing a full install. Where the posts have moved or the rails are split, patching buys you months, not years. We’ll quote both options in writing so you can decide with real numbers.
Most Woodland Hills fence installations we do are completed in two to three working days, including post setting, framing, hardware, and cleanup. If we’re matching custom trim or waiting on a specific finish-matched part, add a few days for the order. You’ll have the schedule in writing before we start.
We stock common post anchors, gate hardware, trim profiles, and finish-matched fasteners on our trucks, and our suppliers in the Valley carry the wider KraftMaid finish range for order within a day or two. If it’s an odd size or a discontinued finish, we’ll tell you before you pay for anything.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Woodland Hills, CA at Mason Remodeling Co Woodland Hills, serving Woodland Hills and nearby areas.
