Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Fence Installation: The Woodland Hills Owner’s Guide
Dvele fence installation in Woodland Hills typically runs $3,500 to $9,000 fully installed, and we stock the common Dvele-compatible fence hardware on our trucks so most jobs are completed in a single visit. You usually discover the problem the hard way: a gate that drags against the pavers, a post that’s leaning after winter rains softened the soil, or a panel that vibrates loose every time the Santa Ana winds kick through the canyons. We are an independent service provider, not affiliated with Dvele, but we work on their fence systems regularly enough to know exactly what fails and what it costs to make it right.
Which Dvele Models This Applies To
Dvele’s fence packages differ from the generic big-box panels you’ll find at a hardware store, and that matters when you’re matching parts. Dvele homes across Woodland Hills, particularly in the newer developments west of Valley Circle and up near the foothills, use steel post receivers set into concrete footings with modular horizontal slat panels that lock into place. The panel widths are typically 36 to 48 inches, and the post spacing follows Dvele’s own engineering spec rather than a standard 6-foot or 8-foot center. Before we order or fabricate anything, we check the stamped model number on the inside face of the bottom rail or on the post cap. If that label is weathered off, we measure the post-to-post opening and the slat profile to identify the exact series. Here’s the honest part: for most Dvele fence work, the OEM panel is the right call because the powder-coat color and slat spacing are matched to the rest of the run. Aftermarket equivalents can save money on isolated repairs, but the color match is rarely perfect after a year of Woodland Hills sun. We will give you both prices before you decide.
Styles & brands we work with
Signs Your Dvele Fence Installation Is Failing
- Gate drags or won’t latch. The most common call we get in Woodland Hills is a gate that starts scraping the walkway. The culprit is usually the post receiver shifting in the footing, not the hinge itself. Tightening the hinge buys a few weeks at best.
- Panel rattle in the wind. Dvele panels that click into place rely on a compression fit. Once the rubber isolators dry out and crack from the heat, the panel gets play, and every gust off the Santa Monicas makes it knock against the post. That’s a $40 fix if we catch it before the slat ends deform.
- Post lean after rain. Woodland Hills soil expands hard in wet winters and contracts in the dry season. If the concrete footing was poured too shallow or the soil underneath wasn’t compacted, the post starts listing. We see this most often on slopes in the hillside lots above Mulholland.
- Powder coat bubbling or peeling. Dvele uses a high-quality finish, but scratches from weed trimmers and sprinkler overspray will eventually let moisture under the coating. Once bubbling starts, the steel underneath is corroding. Panels can be cleaned, prepped, and recoated, but if the rust has pitted the surface, replacement is the honest answer.
- Bottom rail sitting in soil. Woodland Hills landscaping crews sometimes bury the bottom rail when they regrade or mulch. Steel and constant soil contact equals rust. The panel is still functional for a while, but the clock is running.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Woodland Hills, full Dvele fence installation or replacement of a run runs $3,500 to $9,000 installed. A single panel swap with no post work is usually $400 to $900, a post that needs resetting in a new footing runs $600 to $1,400 depending on access and excavation, and a complete side yard run with gate replacement and new hardware sits at the top of the range. The difference between the low and high end comes down to three things: linear footage, whether the existing posts can be saved, and how much demo and haul-off is involved. Every quote includes parts, labor, concrete for footings, hardware, and disposal, and we put it in writing before any work starts. The installation is covered by our 365-Day Done Right Promise: if anything we installed fails within a year, we come back and fix it at no charge.
DIY or Call Us?
You can safely check your gate hinges, clean the tracks, and trim back vegetation touching the fence. Those are maintenance tasks, and they’ll extend the life of your Dvele fence. What we tell people not to do is dig out and reset a leaning post themselves. A fence post in Woodland Hills needs a footing 2 to 3 feet deep to stay put through wet winter soil, and a wrong-depth fix just leans again in six months. If the post has shifted, it means the footing failed or was never adequate. Digging that out without hitting irrigation lines or gas requires a call to DigAlert, and honestly, most homeowners in Woodland Hills don’t have a post-hole digger that goes deep enough anyway. If your Dvele fence is showing any of the signs above, call (831) 290-6866 and we will come look at it. The estimate is free.
FAQs
A properly installed Dvele fence in Woodland Hills lasts 15 to 25 years, with the powder coat holding for about 10 to 15 before it needs recoating. The weak points are the posts and the bottom rail, not the panels themselves. Call (831) 290-6866 if you want us to inspect yours and give you an honest remaining-life estimate.
Yes, if the panels are intact and the posts are stable, we can swap hardware, reset a single post, recoat panels, and replace bottom rails without tearing out the whole run. We only recommend full replacement when the steel has rusted through or multiple posts have shifted. Call (831) 290-6866 and we’ll tell you which side of the line your fence is on.
Most Dvele fence installations in Woodland Hills are completed in one to two days. A single panel swap is a two-hour visit. If we’re resetting posts, the concrete needs a day to cure before we hang panels. We’ll give you a written timeline before we start, not after.
We keep the common Dvele slat panels, gate hardware, post caps, and isolators stocked in our Woodland Hills service vehicles, which is why most single-panel jobs can be finished the same day we arrive. If you have an unusual panel size or a color we need to order, we’ll tell you the lead time before we schedule. Call (831) 290-6866 to check what we have for your model.
If your Dvele fence is leaning, dragging, rattling, or showing rust, call Mason Remodeling Co Woodland Hills at (831) 290-6866 to schedule a free estimate. We will send you the name and photo of your technician before they arrive, put the full price in writing before any work starts, and stand behind the installation for 365 days. Tell us what you need done. We’ll tell you what it takes and what it costs. Then we get to work.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Woodland Hills, CA at Mason Remodeling Co Woodland Hills, serving Woodland Hills and nearby areas.
