Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Kitchen Remodeling: The Woodland Hills Owner’s Guide
A full Delta kitchen remodel in Woodland Hills typically runs $14,000 to $45,000 installed, and we can usually start your project within two to three weeks once we’ve walked the space and priced the job. If you’re reading this, you probably have a Delta faucet that’s dripping, a Delta pull-down spray head that won’t retract, or Delta cabinet hardware that’s lost its finish after a few seasons of hard water. Delta builds its kitchen lines well, but Woodland Hills water hardness and daily use find the weak points sooner than most homeowners expect.
We’re Mason Remodeling Co Woodland Hills. We are an independent service provider and not affiliated with Delta Faucet Company. What we are is a team that has been pulling Delta fixtures apart, matching the right parts, and building kitchens around them since 2004.
Which Delta Models This Applies To
Delta’s kitchen lineup splits into two rough families. The big-box lines – Linden, Essa, Trask, Porter, and Cassidy – share cartridge and spray-head architecture across most models, which means a repair part is easy to match once you know the finish. The designer and Touch2O lines – Trinsic, Zura, Ara, and the voice-activated systems – use different cartridges, electronic control modules, and sealed spray heads that are not interchangeable with the standard series.
The fastest way to identify what you have: look under the sink at the supply lines. Delta prints the model number on a small tag near the base of the faucet body, and on the original box if you kept it. The finish code matters more than people expect. SpotShield Stainless, Arctic Stainless, and Champagne Bronze are different PVD coatings, and no amount of polishing will make a chrome spray head match a Champagne Bronze faucet. If you send us a photo of the tag before we come out, we can bring the right part on the first trip, which saves you a second visit.
For OEM versus aftermarket: Delta’s genuine cartridges run $30 to $45 each and typically last 3 to 5 years in Woodland Hills water before the ceramic discs start to wear. A generic aftermarket cartridge might cost $10 less but often seats slightly looser, which is why we only install genuine Delta internals unless a part is discontinued. For cabinet hardware, hinges, and glides that integrate with Delta fixtures, we also keep compatible KraftMaid and Cambria components on hand because those brand lines are what most Woodland Hills kitchens we open up were originally built with.
Styles & brands we work with
Signs Your Delta Kitchen Remodeling Is Failing
- The faucet drips from the spout after you shut it off. This is almost always a worn seat-and-spring assembly or a scored cartridge. Delta’s ceramic disc cartridges are durable, but sediment from Woodland Hills water carves tiny channels over time, which lets a thread of water through even when the handle feels tight.
- The spray head droops or won’t retract fully. The counterweight under the sink has shifted or the hose has twisted inside the cabinet. It’s a five-minute adjustment, but ignored long enough, the hose kinks permanently and the braided jacket starts to fray.
- The pull-down won’t switch from stream to spray, or it switches on its own. The diverter inside the spray head is gummed with mineral scale. Delta spray heads are sealed units, but soaking the head in vinegar can buy you a few months; replacement heads are $25 to $50 depending on finish.
- Water pressure drops noticeably when the faucet is on full. The aerator or the supply-line screens are packed with sediment. In Woodland Hills, where the LADWP water supply carries a fair amount of mineral content, we see this by year two on most Delta faucets.
- Your Touch2O fixture turns on by itself or won’t respond to touch. The electronic module is failing, usually from battery corrosion or moisture intrusion. This is the one Delta repair where OEM parts genuinely matter – aftermarket control modules have unpredictable touch sensitivity and can leave the faucet locked on.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A Delta faucet cartridge replacement in Woodland Hills runs $120 to $240 installed, including the OEM part. A full faucet swap with drain and supply-line work lands between $400 and $900. A spray-head replacement is $60 to $120. If you’re folding Delta fixture replacement into a full kitchen remodel, the numbers change because the cabinet, countertop, and backsplash scope takes over – that’s where the $14,000 to $45,000 range applies, with most Woodland Hills kitchens landing between $18,000 and $30,000 depending on cabinet quality, countertop material, and whether we’re moving plumbing or electrical.
Every quote includes the written price before work starts, the part cost broken out, and labor shown separately so you can see exactly what you’re paying for. No verbal estimate that grows later. The 365-Day Done Right Promise covers our installation work for a year from the completion date, and if a Delta part fails within that window because of how we installed it, we come back and make it right at no charge.
DIY or Call Us?
For a dripping Delta faucet, you can safely try this: remove the aerator and soak it in vinegar overnight, then flush the supply lines into a bucket. That solves maybe a third of the pressure and drip complaints we get over the phone. Anything beyond that – pulling the cartridge, dealing with the spring-and-seat assembly, or touching the Touch2O electronics – is where a wrong wrench angle turns a $130 repair into a $900 faucet replacement. Delta’s ceramic cartridges sit under spring tension, and if the retaining clip launches into the cabinet backboard, you’ll spend an afternoon finding it.
If you’d rather not gamble the afternoon, call (831) 290-6866. Tell us what’s dripping, send a photo of the model tag if you can, and we’ll bring the exact part we expect to need plus a backup. Isaac Pruett still quotes most of these jobs himself, and he’ll tell you straight whether the faucet is worth saving or not.
FAQs
Most Delta cartridges and spray heads last 3 to 5 years here before hard water scale and sediment affect performance. Touch2O control modules average 4 to 6 years. Cabinet hardware and hinges paired with Delta fixtures typically fail after 8 to 12 years of daily use. Call (831) 290-6866 if yours has stopped working sooner, and we’ll inspect the part to see if it’s a manufacturing defect or a water-quality issue.
Cartridges, seats, springs, and aerators can be repaired with genuine Delta parts. Spray heads and electronic modules are sealed units and get replaced, not rebuilt. The repair-or-replace call usually comes down to whether the faucet finish is still in good shape – if the PVD coating is worn through, a new faucet is the better money. Call (831) 290-6866 and we’ll give you an honest answer over the phone before we ever schedule the visit.
A cartridge or spray-head replacement takes 30 to 60 minutes once we’re under the sink. A full faucet replacement with supply-line work runs 90 minutes to two hours. Kitchen remodels that incorporate Delta fixtures take 4 to 8 weeks depending on cabinet lead times and countertop fabrication. Estimates are free – call (831) 290-6866 to schedule one.
We keep genuine Delta cartridges, springs, seats, aerators, and spray heads for the most common Woodland Hills models on our service trucks. For specialty finishes like Champagne Bronze or matte black, we order ahead so the part is in hand before the visit. If you send the model number in advance, we’ll confirm we have the exact part before anyone rings your doorbell.
Tell me what you need done. I’ll tell you what it takes and what it costs. Then we get to work.
Call (831) 290-6866 to schedule your free estimate for Delta kitchen remodeling in Woodland Hills.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Woodland Hills, CA at Mason Remodeling Co Woodland Hills, serving Woodland Hills and nearby areas.
