Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Roofing: The Woodland Hills Owner’s Guide
Cambridge Pavers isn’t a roofing manufacturer. The brand makes interlocking concrete pavers for driveways, patios, walkways, and pool decks. If you’ve got Cambridge Pavers on your Woodland Hills property and the roof above them is failing, what you’re actually dealing with is a roofing system adjacent to a Cambridge hardscape, and damage from a leak or failed flashing can destroy the paver base below it. Roof repair in Woodland Hills runs $400 to $1,800, and a full roof replacement runs $8,000 to $20,000 depending on slope, deck condition, and material. We’re one of the few crews in the area that handles both the roofing repair and the paver reset underneath it, so you don’t end up calling two companies and hoping they talk to each other.
Most homeowners discover the problem the same way: a drip in the garage after a winter rain, a soft spot near the roofline, or a patch of pavers that has settled unevenly because water has been washing out the base. By the time the pavers move, the roof has usually been leaking for months.
Which Cambridge Pavers Models This Applies To
This matters because not every paver problem is the same. Cambridge Pavers come in three main product lines: the Ledgestone series (thicker, heavier, often used for driveway aprons and walkways), the Roundtable series (a mid-weight paver common on patios), and the Maytrx series (a thinner, lighter paver used more for decorative inlays). Each one sits on a different base depth, and each reacts differently when roof runoff pools against it.
The part you need usually isn’t a paver at all. It’s the flashing, the drip edge, or the drain line at the roofline that should have been moving water away from the paver field. A compatibility gotcha we see in Woodland Hills: older homes built before the 2000s often have no kickout flashing at the roofline, which means rainwater runs straight down the fascia and under the first row of pavers. Cambridge Pavers makes a 60mm and an 80mm paver; if your base was built for 60mm and you replace with 80mm, the new paver sits proud and becomes a trip hazard at the door. That’s a real spec range difference, and it’s the kind of thing that gets missed when the roofing crew and the hardscape crew never communicate.
On OEM versus aftermarket: Cambridge doesn’t sell roofing parts, so there’s no such thing as a Cambridge-branded drip edge. What matters is that the flashing is galvanized steel or copper, not aluminum, which corrodes faster in the salt-tinged marine air that pushes over the Santa Monica Mountains. We stock quality aftermarket flashing and edge metal on the truck, matched to the paver thickness already installed. Before we quote, we measure the paver height, the roofline overhang, and the gutter path. If the roof is fine and only the pavers moved, the job changes.
Styles & brands we work with
Signs Your Cambridge Pavers Roofing Is Failing
- Pavers tilting or sinking within three feet of the house. Water from a failing roof edge is washing out the sand base under the pavers. The paver isn’t broken; the drainage is.
- Efflorescence, the white chalky film, on the first row of pavers against the wall. This is mineral salt pushed to the surface by water that is continuously wetting and drying. It means water is getting behind the paver, not just on top of it.
- Dark staining on fascia board or stucco at the roofline. Water is running down the wall instead of into a gutter or flashing diverter. Over time this rots the fascia and loosens the paver edge restraint.
- Gap opening between the roof edge and the paver field. Both materials expand and contract in Woodland Hills heat, but if a half-inch gap appears and stays, the base is eroding and the edge restraint has failed.
- Cracked or lifted ridge shingles above a paver walkway. This is the source, not the symptom. When the ridge cap is compromised, water enters the roof system and travels to the lowest point, which is often right at the paver line.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a roof repair that also requires resetting a section of Cambridge Pavers in Woodland Hills, plan on $400 to $1,800 for the repair itself. If the roof has reached the end of its life, a full replacement runs $8,000 to $20,000, with the paver reset typically running $3,500 to $11,000 as a separate line item depending on square footage and whether the base can be recompacted or needs to be dug out and rebuilt.
What drives the range is the roof pitch, how many layers of old material need to come off, whether the decking has rotted, and whether the paver base is salvageable. We write every job as a line-item quote before any work starts: parts, labor, haul-away, and the paver reset are separate items. You’ll know the total before we touch anything. The workmanship is covered by our 365-Day Done Right Promise: if the repair or reset fails within a year of completion, we come back at no charge. No dispute process, no “that’s normal settling.”
DIY or Call Us?
You can safely check a few things yourself: look at the roofline after a rain, check for standing water near the paver edge, and see if the drip edge is visible or if it’s been painted over and sealed. What you shouldn’t do is get on the roof, pull up shingles, or dig out a paver field that sits against the foundation. That last one surprises people. Digging out pavers next to the foundation without knowing where the waterproofing membrane ends can break the seal and let water into the soil against the wall. We’ve fixed more than one “simple reset” in Woodland Hills that turned into a foundation moisture problem because someone trenched too deep.
If you’re not sure whether it’s a roof issue, a paver issue, or both, call us at (831) 290-6866. We’ll look at it, tell you what’s actually wrong, and put the fix in writing before any work starts.
FAQs
Cambridge Pavers themselves typically last 25 to 35 years in Woodland Hills’ dry heat, but the area adjacent to a roofline often fails in 10 to 15 years because of water exposure. The paver isn’t the weak point; the drainage is. Call (831) 290-6866 and we’ll evaluate both systems together rather than treating the paver as an isolated problem.
Usually yes. If the pavers are intact, we lift them, recompact or rebuild the base, and reset them. You only pay for new pavers when one is cracked beyond use. Call (831) 290-6866 for a free estimate and we’ll tell you exactly what can be saved.
A typical roof edge repair with a paver reset takes one to two days depending on base condition and roof access. Full roof replacements with paver work run three to five days. Call (831) 290-6866 and we’ll give you a realistic timeline for your specific setup.
We keep galvanized flashing, drip edge, paver edge restraints, and base material on the truck. Cambridge Paver replacements are ordered in as needed, but matching your existing color and line is straightforward since Cambridge keeps its color formulations consistent across runs. Call (831) 290-6866 and we’ll verify the match before ordering anything.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Woodland Hills, CA at Mason Remodeling Co Woodland Hills, serving Woodland Hills and nearby areas.
