Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Driveway & Pavers: The Woodland Hills Owner’s Guide
If you have a Cambridge Pavers driveway or patio in Woodland Hills and you’re seeing cracked units, sunken sections, or edge restraints pulling away, we carry and install Cambridge Pavers-compatible pavers and driveway materials throughout the San Fernando Valley. Full paver driveway installation in Woodland Hills runs $7,000 – $18,000, while smaller repair jobs like replacing a failed section or rebuilding a sinking edge typically land between $1,200 and $4,500 depending on square footage and base condition. Most owners discover the problem the same way: a paver starts rocking underfoot, water pools where it never used to, or the sand joint between Cambridge units washes out after a heavy rain and the whole field starts shifting.
What most people don’t realize is that the paver itself rarely fails first. Cambridge manufactures a dense, color-through concrete paver that handles Southern California sun well, but the base beneath it, or the edge restraint around it, gives out and takes the pavers with it. Isaac Pruett has pulled up enough Woodland Hills driveways and patios to tell you the same thing we tell every customer: the part you can see is only half the story. We’re an independent service provider, not a Cambridge Pavers dealer, and that means we will tell you honestly when a $400 repair fixes the problem and when the base has failed badly enough that the whole section needs to come up and go back down properly.
Which Cambridge Pavers Models This Applies To
Cambridge Pavers builds its hardscape lines around a handful of distinct product families, and the compatibility question is bigger than most homeowners expect. The round and square paver shapes like RoundTable, Sherwood, and Ledgestone get used heavily for patios and walkways, while the larger format Cambridge slab lines and permeable pavers show up more in Woodland Hills driveways. The gotcha we run into constantly: Cambridge intentionally varies unit dimensions and joint spacing between its paver shapes, so a paver from one line does not drop cleanly into a field built from another, even when both are listed as the same nominal size. You cannot eyeball it. You have to measure the actual unit, check the spacing between pavers, and match the edge profile.
Identifying the right material starts with what you can see on the paver itself. Cambridge stamps a manufacturer code and often a color name on the back or bottom of most units. If that’s worn off or buried, we measure the paver’s actual dimensions (not nominal), check its edge shape, and match the color blend against Cambridge’s current line and discontinued color palettes. For OEM vs aftermarket on Cambridge specifically: Cambridge’s paver color blending is the hardest thing to match aftermarket. A generic “gray” or “tan” paver from a big-box store will never blend with a Cambridge color-through paver because Cambridge builds its color into the full depth of the unit and runs its own aggregate blends. Aftermarket equivalents exist for base panels and edge restraints, and we use them where they perform correctly and save you money. For a visible field paver that has to match, OEM is the answer almost every time.
Styles & brands we work with
Signs Your Cambridge Pavers Driveway & Pavers Is Failing
- Rocking or wobbly pavers underfoot. A paver that moves when you step on it has lost its sand joint and is starting to work against the units around it. Walk your driveway after a rain and step on any edge that looks damp or dark; that’s where the base is starting to wash out.
- Water pooling in low spots that used to drain. Cambridge pavers are accurately sized, so pooling almost always means the base underneath has settled unevenly, not that the pavers warped. In Woodland Hills, the dry season bakes the soil into rock, then winter rains soften it and create exactly this kind of uneven settlement.
- Sand missing from joints after rain. If you can see gaps between your Cambridge pavers where the joint sand used to be, water is already getting under the units. Left alone in our climate, this accelerates quickly, especially on sloped Woodland Hills driveways where runoff is fast and erosive.
- Edge restraints pushing out or buried. The edge restraint is the plastic or aluminum strip holding the outer pavers in place. When it lets go, the whole field starts creeping toward the weakest edge, opening cracks in the middle. Homeowners often think the pavers shrank; what actually happened is the field moved.
- Visible cracks on multiple pavers in one area. One cracked paver is usually just a dropped tool or a vehicle point load. A cluster of cracks in the same zone means the base has failed and the pavers are bridging a void, flexing under load until they snap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Woodland Hills specifically, here is the straight pricing picture:
- Full paver driveway installation: $7,000 – $18,000 depending on square footage, base depth, and the Cambridge paver line selected.
- Paver patio installation: $3,500 – $11,000 for a typical Woodland Hills yard, again driven by size and base preparation.
- Sectional repair of a failed or sinking area: $1,200 – $4,500 typically, including removing the affected pavers, rebuilding the compacted base, and reinstalling the same Cambridge units where possible.
- Edge restraint repair or replacement: $400 – $1,500 depending on linear feet and whether the outer courses of paver have to come up to do it right.
The range exists because every driveway sits on different soil. Some Woodland Hills lots are on decomposed granite that drains well and compacts solidly. Others are on expansive clay that swells and shrinks seasonally, and those jobs require deeper excavation and more base material. What we include on every Cambridge Paver job, every time: a written line-item price before work starts, no verbal estimates that grow, and no change orders invented mid-job. Our paver installation and repair work carries the same 365-Day Done Right Promise as everything else we build: if the work is not right within a year of completion, from the completion date, we make it right at no cost to you.
DIY or Call Us?
There are things an owner can reasonably check, and then there is the point where doing it yourself turns a $600 repair into a $6,000 rebuild. You can sweep your pavers, refill joint sand when it’s low, and check your edge restraint for visible separation. What you should not try to do is lift a sunken section and “just add some sand.” A paver field is a system: the compacted base, the bedding layer, the pavers, the joints, and the edge restraint all work together. If you lift and re-lay pavers on an uncompacted base patch, it will settle again within months, and worse, you’ll have disturbed the surrounding field and made the eventual repair bigger. Cambridge pavers are heavy, the base work is physically punishing, and for a full driveway the material alone can run to several pallets of pavers delivered to your street. Call us at (831) 290-6866 and we will tell you over the phone whether you are looking at a repair or a replacement. Tell me what you need done. I’ll tell you what it takes and what it costs. Then we get to work.
FAQs
A properly installed Cambridge Paver driveway in Woodland Hills will typically last 20 to 30 years or more on the paver units themselves, because Cambridge builds its color through the full depth of the paver and the concrete mix is dense. The base beneath is what usually has to be rebuilt at the 15 to 20 year mark, even if the pavers still look fine. Give us a call at (831) 290-6866 and we’ll assess the base condition before anyone starts pulling pavers.
In most cases a single cracked Cambridge paver gets replaced, not repaired, because concrete pavers aren’t repairable in place without leaving a visible patch. If the crack is isolated and the base is sound, it’s usually a one-paver swap and a quick sand joint re-set. Call (831) 290-6866 and we’ll tell you if your crack is isolated or a symptom of a base problem that needs more work.
A sectional repair, where we lift a failed area, rebuild the base, and reinstall the pavers, usually takes one to two days. A full driveway replacement in Woodland Hills typically runs three to five working days from excavation through final compaction and joint sand. We’ll give you a written schedule before we start so you know exactly when the crew arrives and when the work is done.
We stock the most common Cambridge paver colors and sizes for the Woodland Hills area, and we can source any current Cambridge line quickly through our supplier network. Discontinued colors take longer because we typically need to match the blend from Cambridge’s archived inventory or a specialty supplier. Call us at (831) 290-6866 and we’ll check stock and lead time while you’re on the phone.
When it’s time to get your Cambridge pavers driveway or patio back to level and solid, call (831) 290-6866 for a free estimate. A live person answers, 24 hours a day, every day of the year, including weekends and holidays. We’ll send a background-checked, uniformed technician with a photo ID badge, and you’ll get the name and photo of the person coming before they arrive. Written price before any work starts. A written guarantee on the completed job. Call now and tell us what’s going on with your pavers; we’ll take it from there.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Woodland Hills, CA at Mason Remodeling Co Woodland Hills, serving Woodland Hills and nearby areas.
