Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Windows & Doors: The Woodland Hills Owner’s Guide
If you have a Barrette window or door with a failed part, we stock Barrette-compatible hardware and replacement components at our Woodland Hills shop, and we install them for a typical parts-plus-labor total of $180 to $650 depending on the part. Most common failures (rollers, balances, weatherstripping, locksets) can be handled in a single visit. Homeowners usually find the problem the same way every time: a window that won’t stay up, a patio door that drags, or a lock that stopped lining up. You’re not imagining it. Barrette products are sold through a lot of channels, and some of the parts in early production runs simply wear faster than they should.
We’re an independent service provider, not affiliated with Barrette, and we’re one of the few Woodland Hills shops that keeps a working inventory of their common sizes on hand rather than ordering everything blind.
Which Barrette Models This Applies To
Barrette’s window and door lines changed over the years, and the part you need depends on which series your unit came from. The most common series we see in Woodland Hills homes are the Barrette vinyl single-hung and slider windows (often sold with a white or tan frame, double-pane glass, and a snap-in glazing bead), plus their sliding patio doors. The critical compatibility gotcha: Barrette’s roller housing changed around 2018. Units made before that use a rounded roller cartridge that slides into a rear channel. Newer production uses a square-shouldered cartridge with a taller profile. They look close enough to confuse you at a glance, and the wrong one will bind within a week.
To identify yours, look at the spacer bar between the glass panes. It’s the metal strip you can see when you stand at an angle. Barrette stamps the series code and glass date there, something like “BRT-2200” followed by a four-digit year. Write that down or take a photo, and bring it when you call us. If the spacer has no marking, pull the sash out and measure the roller cartridge width in millimeters, not inches. We need that number to match OEM or quality aftermarket equivalent correctly. For Barrette windows specifically, OEM replacement parts tend to cost 30 to 50 percent more than good aftermarket equivalents, and in about a third of cases the aftermarket part is actually the better build. We stock both and we’ll tell you which makes sense for your unit.
Styles & brands we work with
Signs Your Barrette Windows & Doors Is Failing
- The sash won’t stay up (single-hung or slider). This is almost always a balance cassette or constant-force spring that has lost tension. On Barrette single-hungs, the balance sits inside the side jamb channel, and when it fails the window drops hard. That drop is what cracks the corner welds, so don’t keep using it that way.
- The door or window drags and scrapes when you open it. A roller or glide that has flattened. Barrette’s older rollers have a nylon wheel that goes out of round after years of Woodland Hills heat and dry air. Once it flat-spots, you’re dragging metal on metal, and that wears the track itself.
- Air you can feel around the sash even when it’s closed. The weatherstripping is compressed beyond recovery, or the sash has sagged enough to break the seal. On Barrette windows this often shows up as a gap at the meeting rail on sliders or at the top corner on single-hungs.
- The lock won’t line up or won’t throw all the way. This is a misalignment problem, not always a bad lock. On Barrette patio doors, the keeper (the metal plate on the jamb) is held by screws that loosen over hundreds of open-close cycles. Tightening sometimes fixes it; a bent keeper means replacement.
- Condensation you can’t wipe off, between the glass panes. That’s a failed seal, not a part you can patch. The correct fix is an insulated glass unit replacement, which we measure and order cut to size for Barrette frames. In Woodland Hills’s dry season this is less visible, but it appears during our cooler wetter months and it never heals itself.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here are the installed price ranges we quote in Woodland Hills for the most common Barrette parts:
- Balance or spring replacement: $95 – $240 per sash, installed
- Roller replacement (window or patio door): $60 – $180 per opening, installed
- Weatherstripping set: $40 – $120 per window or door, installed
- Lockset or keeper replacement: $45 – $150, installed
- Insulated glass unit replacement: $280 – $650 per sash, depending on glass size and low-E spec
What drives the range is whether the part is OEM Barrette or aftermarket, whether the sash needs realignment as part of the job, and how much of the track or jamb is worn. The labor and the part are listed separately on your written estimate, and the price we give you before work starts is the price you pay. There is no change order for “unexpected conditions” on a parts job. Every replacement part we install carries our 365-Day Done Right Promise: if it fails within a year of the completion date, we come back and fix it at no charge. We also provide a written guarantee on the workmanship, with coverage terms spelled out before you approve anything.
DIY or Call Us?
The honest answer depends on the part. Weatherstripping and lock keepers are reasonable for a careful homeowner to check and sometimes replace with a screwdriver and a measuring tape. We’ll tell you that straight. But balance cassettes on Barrette windows are under constant spring tension. They don’t release violently the way a garage-door spring does, but a tired balance removed wrong can snap back and take a finger with it. Patio-door rollers require pulling a 70 to 100 pound panel out of its track, and a dropped panel breaks glass and toes with equal ease. If the part involves spring tension or a heavy glass panel, call a professional. If you’re not sure which category yours falls into, call us at (831) 290-6866 and describe the symptom. We’ll tell you what you’re dealing with and whether it’s safe to touch, before anyone schedules anything.
FAQs
In Woodland Hills, most Barrette hardware lasts 10 to 15 years before something needs replacement, with weatherstripping on the shorter end and balances or rollers on the longer end, though direct sun exposure on south- and west-facing walls shortens that meaningfully. Aftermarket replacements we install often outlast the original equipment. Call (831) 290-6866 for an honest assessment of what’s worn and what’s still fine.
Sometimes locks and keepers can be realigned or tightened rather than replaced, and we’ll do that when it saves you money and holds up. Rollers, balances, and failed glass seals are replacement items; there is no durable field repair for a flattened nylon wheel or a spent balance cassette. Call (831) 290-6866 and tell us what the window or door is doing; we’ll tell you which path applies.
Most single-part replacements like a balance, roller, or weatherstripping set take 30 to 90 minutes on site. Insulated glass units require a measure, a factory order, and a second visit for installation, typically one to two weeks total from first call to finished glass. We stock common Barrette balances and rollers on the truck in Woodland Hills, which is why most calls are one visit.
We keep the most commonly needed Barrette balances, rollers, locks, and weatherstripping in stock at our Woodland Hills location, and less common sizes or glass units are ordered to spec with an honest lead time given before you commit. We’re independent of Barrette, which means we can also use a quality aftermarket part when it makes more sense for your budget and your window. Call (831) 290-6866 for a free estimate on your specific part.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Woodland Hills, CA at Mason Remodeling Co Woodland Hills, serving Woodland Hills and nearby areas.
