Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Fence Installation: The Woodland Hills Owner’s Guide
We stock and install Mr-Glass-compatible fence installation parts across Woodland Hills, with most complete fence installations running between $3,500 and $9,000 depending on linear footage, existing post condition, and terrain. If your Mr-Glass fence panel has cracked, shattered, or pulled loose from its frame, we can usually match the part and schedule the repair within the week, often same-week when the part is in our Woodland Hills inventory. The telltale sign that brings most owners in: a hairline crack that started near a post and spread across the panel during a Santa Ana wind stretch, or a glass panel that suddenly looks hazy at the edges where the weather seal failed.
Which Mr-Glass Models This Applies To
Mr-Glass fence systems in Woodland Hills generally fall into two configs: frameless glass infill panels that slide into aluminum or steel channels, and framed panels where tempered glass sits inside a powder-coated aluminum surround. The compatibility gotcha is the glass thickness. Most Mr-Glass panel installations we see in Woodland Hills use 10mm or 12mm tempered glass, and the channel depth on the frame dictates which one you need. A 12mm panel will not seat properly in a channel milled for 10mm, and forcing it is how panels crack at the corners. Check the lower corner of your existing panel for an etched label showing the tempering certification and thickness. If the label is weathered off, measure the glass edge with a caliper before ordering anything.
OEM Mr-Glass replacement panels are the safest route when the frame is still square and only the glass failed. That said, we regularly install quality aftermarket tempered panels from local Los Angeles glass fabricators that match Mr-Glass specs exactly, at roughly 20-30% below OEM cost. The glass itself has to meet the same ANSI Z97.1 safety standard regardless of whose name is on the crate. Where OEM matters more is the aluminum frame and post caps, since those are extruded to Mr-Glass’s specific channel profiles and aftermarket pieces rarely seat as cleanly.
Styles & brands we work with
Signs Your Mr-Glass Fence Installation Is Failing
- Hairline cracks radiating from post anchors. This is usually wind-load fatigue. Woodland Hills sits in a wind corridor, and repeated gusting flexes the panel against a rigid post anchor until the glass develops stress fractures. Once you see the first crack, the panel is compromised and will continue to spread.
- Cloudy or white edges along the panel perimeter. The laminate layer or edge seal has begun to delaminate, often from years of direct sun on the west-facing side. It starts cosmetic, but delamination weakens the panel’s impact rating and will eventually cause a full failure.
- Loose or rattling panels when the wind picks up. The rubber gaskets inside the frame channels have compressed and hardened with age and heat exposure. The glass now has room to move, and every movement grinds the edge against the aluminum channel, creating weak points.
- Leaning posts or gaps opening at the panel-to-post connection. The post footing has shifted in the expansive clay soil common to parts of Woodland Hills south of Ventura Boulevard. The panel itself may be fine, but the structural connection is no longer doing its job.
- Visible rust streaks below the frame on steel-post Mr-Glass systems. Some older Mr-Glass installs used galvanized steel posts rather than aluminum. Once the galvanizing wears through, the post rusts internally, and the panel becomes locked in place, unable to flex safely under load.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For most Woodland Hills Mr-Glass fence work, you’re looking at $3,500 to $9,000 installed. A single panel replacement on an otherwise sound fence typically lands at the low end of that range, around $3,500 to $5,000 once you factor in the custom-cut tempered glass, new gaskets, and the labor to remove and reset the panel without damaging the frame. A full run rebuild with new posts, footings, and all panels pushes toward the top of the range. What drives the price: how many panels are involved, whether posts need to be re-set in concrete, soil conditions at your property, and whether any panel needs custom fabrication to match a nonstandard size.
Our written price is delivered before any work starts, and it covers the parts, labor, haul-away of the old glass, and a 365-day warranty on the installation. If the panel shifts or the gasket fails within a year of the completion date, we return and make it right at no cost to you. That’s the Done Right Promise, and it applies to this work just as it does to our larger remodeling projects.
DIY or Call Us?
You can safely handle the diagnosis: check for cracked glass, measure panel thickness, note which panels are loose, and photograph the frame condition before you call anyone. What you should not do is attempt to remove a cracked tempered glass panel yourself. Tempered glass holds tension across its entire surface, and a cracked panel can shatter into thousands of small pieces the moment you unseat it from the frame channel. That’s not a worst-case scenario, it’s how tempered glass is designed to fail, and it’s why we take this part seriously.
The install itself also requires two people for most panel sizes, a level of post-anchor adjustment that assumes the posts are still plumb, and the patience to re-seat glass without scratching the tempering on the channel edges. If any of that sounds like more than you want to manage on a Saturday, call us at (831) 290-6866 and we’ll send someone who has done this exact swap before.
FAQs
A properly installed Mr-Glass fence panel in Woodland Hills typically lasts 15 to 20 years before the gaskets harden or the glass develops stress fractures. Panels facing west into the afternoon sun tend to show edge delamination a few years earlier. Call (831) 290-6866 for a condition assessment and an exact replacement quote.
No, a cracked tempered glass panel cannot be repaired, and any adhesive or filler applied to the crack is a temporary cosmetic fix that does nothing for the structural integrity of the glass. Once tempered glass fractures, the only safe solution is full panel replacement. Call (831) 290-6866 and we’ll match your panel thickness and get it ordered.
A single panel replacement usually takes one visit, about two to three hours on site, assuming the frame and posts are in good shape. If posts need re-setting in new concrete, expect a two-visit schedule to allow the footings to cure. We’ll confirm the timeline in your written estimate before any work begins.
We stock common 10mm and 12mm tempered panels, replacement gaskets, and frame hardware on our service vehicles for the Woodland Hills area. Nonstandard panel sizes are custom-fabricated by our Los Angeles glass partners and typically arrive within a few business days. Call (831) 290-6866 and we’ll tell you whether your part is on the truck today.
Tell me what you need done. I’ll tell you what it takes and what it costs. Then we get to work.
Call (831) 290-6866 to schedule your free estimate for Mr-Glass fence installation in Woodland Hills. We’ll send you the name and photo of your technician before the visit, and you’ll get a written price before any work starts. Mason Remodeling Co Woodland Hills is an independent service provider and is not affiliated with Mr-Glass. We also stock and install parts for KraftMaid, Cambria, and Silestone products when fence work leads to a bigger backyard refresh.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Woodland Hills, CA at Mason Remodeling Co Woodland Hills, serving Woodland Hills and nearby areas.
