Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Kitchen Remodeling: The Woodland Hills Owner’s Guide
If you have a Boral kitchen component that’s failed or is on its way out, here’s the straight answer: we source and install Boral-compatible kitchen remodeling parts and finishes throughout Woodland Hills, and a full kitchen remodel using Boral materials typically runs $14,000 – $45,000 installed, depending on scope. We stock common Boral trim, edging, and cabinet hardware on the truck, and we can usually have most other Boral-specific parts matched and in hand within a few business days. Most Woodland Hills homeowners don’t discover a Boral part has failed until something visible goes wrong: a cabinet door stops closing flush, a laminate edge lifts, a countertop seam opens, or a drawer slide gives out after years of daily use. By the time you see it, the fix usually means more than a tube of adhesive.
We’re an independent remodeler serving Woodland Hills and nearby areas. We are not a Boral dealer or franchise, which means we’ll tell you plainly when an OEM part is worth the cost and when a quality aftermarket equivalent will do the same job for less.
Which Boral Models This Applies To
Boral builds several lines of kitchen cabinetry, trim, and surfacing products, and compatibility matters. The parts we most often replace in Woodland Hills homes fall into three groups: Boral cabinet doors and drawer fronts, Boral laminate edging and trim strips, and Boral-compatible hardware (hinges, slides, and corner brackets) sized to the original cabinet boxes.
Here’s the compatibility gotcha that trips people up: Boral cabinet lines use metric spacing on hinge cups and drawer slide mounting holes on some of their European-style series, while older American-style Boral cabinets use standard 35mm hinge bores and 1/2-inch overlay spacing. Measure before you order anything. We check the hinge bore diameter and the drawer slide length on every job before we commit to a part. A 35mm hinge will not fit a 26mm bore without modification, and forcing it will split the door face.
For OEM parts, Boral-branded hinges and slides tend to cost 30 – 60% more than the equivalent Blum or Salice aftermarket hardware, which is often the exact same factory part with a different stamp. In Woodland Hills kitchens, we typically recommend aftermarket for hidden hinges and slides, and OEM only when the customer is matching a specific Boral laminate color or wood-grain pattern that isn’t available elsewhere.
Styles & brands we work with
Signs Your Boral Kitchen Remodeling Is Failing
- Cabinet doors that won’t stay closed or sit crooked. This is almost always failed hinge springs or stripped hinge mounting screws. The hinge works fine for years, then one day the door sags a quarter inch and won’t go back. The fix is swapping the hinge, but if the screw holes are wallowed out, the door may need a repair plate or a new door front.
- Laminate edge peeling at the sink or dishwasher line. Woodland Hills summers are dry, but the real enemy here is moisture cycling. Boral laminate edges tend to lift first where steam and splash hit them daily. Once the edge lifts, water gets under the laminate and the substrate starts to swell. Gluing it back down only works if the substrate is still solid.
- Drawer slides that grind, stick, or drop one side. A single failed ball bearing in a slide makes the whole drawer feel wrong. If you’re yanking a drawer open and it catches halfway, the slide is done. Running it longer wears the cabinet box sides, turning a cheap slide swap into a box repair.
- Countertop seams opening or darkening at the joint. Boral countertops are engineered surfaces, and seams can separate after years of heat and settling. In Woodland Hills, we see this most often on south-facing kitchens where direct sun hits the counter daily. A separated seam is a moisture entry point, and the longer it sits open, the more the substrate absorbs.
- Soft-close mechanisms that slam. Soft-close pistons have a finite life, usually 5 – 10 years of daily use. When they fail, the door still works but slams shut. Homeowners often ignore it, but the shock of slamming eventually loosens the hinge screws and cracks the door face.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Woodland Hills, full Boral kitchen remodeling runs $14,000 – $45,000. At the lower end, that includes cabinet refacing or partial replacement, new hardware, and laminate repair or replacement on counters. At the upper end, you’re looking at full cabinet replacement, new countertops, backsplash, and electrical or plumbing rough-in work. Here’s how the component-level pricing breaks down:
| Work | Typical Installed Range (Woodland Hills) |
|---|---|
| Cabinet Installation (full replacement) | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel (partial scope) | $9,000 – $20,000 |
Everything we quote includes parts, labor, haul-away of the old materials, and cleanup. You get a written price before any work begins, not a verbal estimate that grows on the final invoice. If a hinge fails or a drawer slide acts up within 365 days of completion, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s stated on every contract, not hidden in fine print.
DIY or Call Us?
Some Boral fixes are genuinely doable for a homeowner with basic tools. Adjusting cabinet door alignment with the hinge adjustment screws, tightening loose drawer hardware, and cleaning debris out of slides are all safe Saturday-morning jobs. If the door closes flush after adjustment, you’re done. If it doesn’t, the hinge or the door face has a real problem.
What’s not DIY-friendly is anything involving laminate edge repair, countertop seam work, or structural cabinet box repairs. Get the substrate wrong and you’ll trap moisture inside, which turns a cosmetic peel into a rotting cabinet box within a year. We’ve replaced more than a few cabinet sides in Woodland Hills where a homeowner tried to glue a lifted edge and sealed water inside instead. The materials cost for that repair runs hundreds; the labor is the expensive part, and it’s the reason we tell people to call us before the edge gets worse.
If you’re not sure whether you’re looking at a ten-minute fix or a real problem, call (831) 290-6866 and describe what you see. We’ll tell you straight what it likely is and whether it’s worth a house call.
FAQs
Boral cabinet hinges and drawer slides typically last 10 – 20 years under normal daily use in Woodland Hills, but soft-close pistons usually fail in 5 – 10 years. Laminate edges on kitchens with high moisture exposure, especially near the sink or dishwasher, often show wear within 8 – 12 years. Our dry summers help the substrate stay stable, but daily steam and splash cycles take their toll regardless of the climate. Call (831) 290-6866 if your cabinets are showing age and you want to know exactly what’s still solid.
Sometimes. Hinges, slides, and soft-close pistons are replaceable parts and repairing usually means replacing them outright. Laminate edge lifting can be re-bonded only if the substrate underneath is dry and intact. If the particleboard has swollen or darkened, the repair won’t hold and the panel needs to be replaced. We’ll tell you which path makes sense before any money changes hands. Call (831) 290-6866 for an honest assessment, and estimates are free.
Most hardware swaps, like replacing a set of hinges or drawer slides, take 1 – 3 hours once the parts are in hand. Laminate edge replacement and countertop seam repair typically take a full day because of the surface prep and adhesive cure time. If the job grows into a full kitchen remodel, we’ll give you a schedule upfront and stick to it as closely as the work allows. Call (831) 290-6866 and we’ll give you a realistic timeline for your specific part.
We carry common Boral-compatible hinges, slides, and hardware on the truck. Boral-specific laminate colors, wood-grain patterns, and matched cabinet doors usually need to be ordered, which takes a few business days in Woodland Hills. We’ll confirm what’s in stock before you commit to a house call. Call (831) 290-6866 with your model information and we’ll check stock while you’re on the phone.
If you’ve got a Boral kitchen part giving you trouble in Woodland Hills, give us a call at (831) 290-6866. Tell me what you need done. I’ll tell you what it takes and what it costs. Then we get to work. Your estimate is free, your price is in writing, and the work comes with a 365-day promise. We also work with KraftMaid, Cambria, and Silestone materials if you’re thinking bigger.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Woodland Hills, CA at Mason Remodeling Co Woodland Hills, serving Woodland Hills and nearby areas.
