







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Kitchen Remodeling: The Woodland Hills Owner’s Guide
A full Blanco kitchen remodel in Woodland Hills typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop material, and whether you’re keeping the existing Blanco sink and faucet or replacing them. Most homeowners call us after one specific moment: a Blanco sink flange has loosened, a Silgranit surface has chipped, or the faucet cartridge has started dripping and they can’t source the exact replacement part on their own. We carry Blanco-compatible parts on our trucks, and we match them to your model before we quote anything.
Which Blanco Models This Applies To

Blanco makes several kitchen lines, and the parts are not all interchangeable. The Silgranit sinks (PuraDur, Precis, Diamond, Performa, and Culina) use different mounting hardware than the stainless Ikon and Axis series, and the faucet cartridges differ between Blanco’s pull-down models and the older side-spray designs. If you still have the original documentation, look for the model number printed on a white sticker inside the cabinet door or on the underside of the sink basin. No sticker? We can identify it by measuring the bowl depth and the overall width, because a Precis and a Diamond will share a rim profile but take entirely different strainer assemblies.
One gotcha we see regularly in Woodland Hills: Blanco’s older 510- and 511-series faucets use a ceramic disc cartridge that California’s hard water will seize within six to eight years, and the aftermarket equivalents from Danco or Plumb Pak often fit, but they don’t seat perfectly. For Blanco specifically, we recommend OEM cartridges for anything you plan to keep longer than two years. For secondary parts like basket strainers, flange gaskets, and soap dispenser pumps, quality aftermarket parts are fine and cost about half as much.
Styles & brands we work with







Signs Your Blanco Kitchen Remodeling Is Failing
Here’s what we see most often when a Blanco kitchen needs parts or a targeted remodel in Woodland Hills:
- Water pooling around the sink flange. The rubber gasket between the strainer body and the Silgranit basin has compressed or cracked, which allows water to wick down into the cabinet base. Left alone, this rots the cabinet floor within a season.
- A faucet that drips no matter how hard you close the handle. That’s the ceramic disc cartridge wearing out, and with Woodland Hills water hardness averaging 12 – 18 grains, it’s not a matter of if, but when.
- Silgranit chips on the sink rim or bowl edge. A dropped cast-iron pan is the usual culprit. Small chips are repairable with Blanco’s color-matched repair compound; deeper gouges usually mean a sink replacement, which is a good moment to talk about a full remodel.
- The spray head loses pressure or won’t retract. Likely a worn diverter inside the faucet body, combined with a tired counterweight on the retractable hose. Replacing both parts at once fixes it for years instead of months.
- Cabinet doors around the sink cabinet no longer close square. Water intrusion from a slow flange leak has swelled the cabinet box. That’s structural, and it usually means reworking the sink base cabinet, not just swapping a gasket.
Replacement Cost & What’s Included

If you’re replacing a single Blanco part, like a cartridge or strainer, you’re looking at $150 – $400 in Woodland Hills, parts and labor included. If the failure has caused cabinet or countertop damage, you’re into remodel territory. A full Blanco kitchen remodel here runs $14,000 – $45,000. The spread comes down to whether you’re keeping your existing footprint, what countertop you choose (entry-level quartz versus full Cambria or Silestone bookmatched slabs), and how much custom cabinetry is involved. KraftMaid and Wellborn cabinet lines land on the lower and middle end of that range; fully custom runs higher.
Every price we give is written, before any work starts. You’ll see parts, labor, and any permit fees listed separately, and the number doesn’t change once the job is underway. On the parts side, we warranty our installation for 365 days from the completion date under our 365-Day Done Right Promise. If a replacement part we installed fails inside that window, we come back and make it right at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Two things you can safely do: check the flange bolts under the sink with a flashlight, and note whether the leak is only happening when the faucet is running or constantly. That helps us diagnose before we arrive. What we’d warn against: pulling a Blanco Silgranit sink to replace the gasket yourself. Silgranit is granite composite and it’s brittle at the rim, and dropping a 40-pound sink into a cabinet while managing the mounting clips takes two people and the right touch. We’ve seen rim cracks from solo DIY attempts that ended up costing more than the original repair would have.
If you’d rather not guess, call (831) 290-6866. A live person answers, every time, any hour. We’ll tell you what we think it is, what it’ll cost, and when we can be there. Tell me what you need done. I’ll tell you what it takes and what it costs. Then we get to work.
FAQs

A Blanco Silgranit sink installed correctly will last 25 – 35 years in Woodland Hills, but the supporting parts around it (gaskets, strainers, cartridges) typically need attention every 6 – 10 years because of our hard water and summer heat cycles. Call (831) 290-6866 if yours is showing wear; we’ll give you a straight answer on whether to repair or replace.
Small chips up to about the size of a dime can be repaired with color-matched Blanco compound, and the result is usually good enough that only you will know it happened. Larger cracks, especially those running vertically through the bowl, mean replacement is the safer call. Either way, we’ll show you what we’re looking at before you spend anything.
Most single-part replacements, like a cartridge or strainer assembly, take under two hours from arrival to cleanup. A full sink swap or cabinet rework usually runs one to two days, depending on what we find once the old unit is out.
Our Woodland Hills trucks carry common Blanco cartridges, strainer baskets, flange gaskets, spray heads, and mounting clips, and we can source model-specific OEM parts within one to two business days. If your part is less common, we’ll tell you upfront and give you a firm arrival window, not an open-ended wait.
Start with a Free Estimate
Whether you need one Blanco part or a full kitchen remodel in Woodland Hills, the next step is the same: call (831) 290-6866 and tell us what you’re dealing with. We’ll give you a written price before any work begins, and you’ll know exactly who’s coming to your door by name and photo before we show up. Mason Remodeling Co Woodland Hills is an independent service provider and is not affiliated with Blanco, but we’ve been matching Blanco owners with the right parts and honest pricing since 2004. Isaac Pruett built his reputation in the Valley on showing up when he said he would and pricing jobs straight, and that’s how we run every call.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Woodland Hills, CA at Mason Remodeling Co Woodland Hills, serving Woodland Hills and nearby areas.


