Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Woodland Hills, CA | Mason Remodeling Co Woodland Hills
We provide independent Jerith fence and gate service across Woodland Hills, from hillside zero-lot-line repairs to full post re-sets on canyon lots. What makes our Jerith work different here is simple: we know this city’s expansive soils, fire-zone setbacks, and steep grade changes better than any flatland crew ever could. If your Jerith aluminum or steel fence is leaning, binding, or losing its coating, call (831) 290-6866 and we’ll send a crew that understands Woodland Hills conditions the moment they park.
We’re Mason Remodeling Co Woodland Hills, and our Jerith sales & service work is built around one idea: the fence has to survive the lot it sits on. Not just the manufacturer’s spec sheet.
Why Woodland Hills Residents Choose Us for Jerith Service
Most fencing crews can install a Jerith panel. Few can tell you why your Estate Series gate binds every August, or why the powder coat on your Regal Series panels is chalking three years early. We can, because we’ve spent years working the hills south of Ventura Boulevard and the post-war neighborhoods around Warner Center. Woodland Hills is our Woodland Hills service area, not a stop on a regional route.
Isaac Pruett, our owner, grew up in Los Angeles and trained at LA Trade-Tech before putting in years across the Valley, including long stretches near Warner Center and the surrounding neighborhoods. He’s seen what valley heat and canyon wind do to aluminum extrusions and steel welds, and he’s the reason our crews re-set posts instead of splicing them and carry heavier aftermarket gate hardware on every truck. When you call, you get a straight answer about what failed and what it costs to fix it right.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Woodland Hills
These are the failure modes we see most often, tied directly to how this specific city treats fencing:
- Powder-coat chalking on Estate Series panels. Woodland Hills routinely hits 100°F in summer, and Santa Ana winds sandblast exposed fence faces with grit. The factory coating breaks down faster here than in coastal neighborhoods, leaving that whitish haze and exposing the aluminum underneath. We powder-match and touch up before pitting starts.
- Sagging or binding double-drive gates. The Premier and Regal Series are solid gates, but they hang on posts set in hillside clay. When that clay expands and contracts with winter rains and summer drought, the posts move. A gate that swung freely in March binds hard by August. We square the frame and re-anchor the posts rather than bending the hinges to compensate.
- Loose post caps and rail brackets on steep lots. Zero-lot-line runoff on hillside properties undercuts footer concrete during winter storms. The posts stay standing but the hardware loosens, and the fence develops a wobble you can feel from the sidewalk. We address the drainage at the footer level, not just the bracket above it.
- Rust bleeding at steel hinge welds on Defender Series. Sprinkler overspray on hillside lawns throws water at the bottom rail, and marine-layer moisture hangs in the shaded canyons. That combination settles right at the hinge welds. We treat the corrosion and swap in stainless hardware where the OEM steel keeps failing.
- Non-code-compliant pool enclosure posts. Many Jerith pool fences in Woodland Hills were installed to manufacturer standard, not LA County hillside standard. When footers heave or erode, the self-closing gate stops latching. Code enforcement notices follow. We fix the footer issue so the gate stays compliant through the next rainy season.
Jerith Service in Woodland Hills: What Local Conditions Mean for Your Equipment
Woodland Hills sits inside a designated Very High Fire Hazard Severity Zone, and that single fact changes how Jerith fencing has to be approached here. Los Angeles County requires ember-resistant Class A vents and six-foot noncombustible fencing within five feet of structures on hillside lots south of Ventura Boulevard. Jerith aluminum panels are one of the few fence products written into defensible-space plan approvals for those properties, which means a damaged panel isn’t just an eyesore – it’s a fire code liability. We’ve replaced storm-damaged Estate Series sections on homes near Topanga Canyon where the original installation had to be matched to the exact powder-coat color and panel profile to keep the defensible-space plan valid. A flatland contractor swapping in any gray aluminum panel would have voided that approval. This is the kind of detail that only matters in a fire-zone hillside city like Woodland Hills, and it’s why we keep Jerith factory-gauge extrusions and powder-matched touch-up kits on hand for fast turnaround.
On a steep lot off Mulholland Drive near Topanga Canyon, our crew re-set 11 warped aluminum posts for a Jerith Estate Series pool enclosure after winter rains exposed three-inch gaps under the original footers. We cored new 30-inch piers into sandstone, shimmed the gate frame back to square, and replaced every latch strike with stainless aftermarket hardware so the self-closing pool gate stayed code-compliant. The owner had already replaced the fence twice with flatland contractors who never addressed the hillside drainage. The posts held through the next Santa Ana wind event. That’s the difference between knowing Jerith and knowing Woodland Hills.
Jerith Models & Products We Service in Woodland Hills
Our crews work on the full Jerith lineup: Estate Series aluminum fence, Premier Series steel fence, Regal Series aluminum fence, and Defender Series industrial steel fence. We use Jerith factory-gauge extrusions and powder-matched touch-up kits whenever they’re available. For gate hinges, post inserts, and latch strikes, we often switch to heavier galvanized aftermarket hardware because the OEM plastic internals fail under Woodland Hills expansion cycles. And when a footer has shifted more than a quarter-inch, we recommend a full post re-set over a splice repair every time. We also handle frameless glass shower enclosures, tub-to-shower conversion, and tile roofing as part of our broader construction work.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Woodland Hills
Here’s what you can expect to pay for the Jerith work we do most often in Woodland Hills. These are real ranges from jobs we’ve completed in this area, not national averages:
| Service | Price Range |
|---|---|
| Jerith fence post re-set / section rebuild | $900 – $2,600 |
| Frameless glass shower enclosure | $1,800 – $5,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
What drives the cost: how many posts have shifted, whether we’re working on a steep grade that requires pier drilling into rock or clay, and whether the damage is one panel or a full section rebuild. Every estimate includes a written line-item price before any work starts, so you’ll know exactly what you’re paying for. Call (831) 290-6866 for a free estimate and we’ll walk the fence line with you.
Serving Woodland Hills, CA - Our Local Coverage Area
We’re based in the Woodland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Woodland Hills
Yes. Jerith’s standard footer depth works on flat, stable ground, but Woodland Hills expansive clay and hillside drainage shift posts within a few seasons. We recommend 24 to 30-inch piers, often cored into sandstone, for any post set on a grade over 10 percent. We’ve pulled up too many footers at the standard 18-inch depth after one heavy winter to trust the spec sheet on a hillside. Call (831) 290-6866 and we’ll look at your grade before you spend money on a repair that won’t last.
In most cases, yes. We keep Jerith factory-gauge extrusions and powder-matched touch-up kits for the Estate Series, so a single bent or storm-damaged panel can usually be replaced without re-fencing the whole side. If the color has faded significantly from Woodland Hills sun exposure, we’ll blend the new panel’s coating to match the aged adjacent sections. Exact matches aren’t always possible on fences installed more than 15 years ago, but we’ll tell you that upfront before you spend anything.
Because the posts are moving. Woodland Hills clay soil expands when winter rains soak it and contracts hard during 100°F summers, which shifts the gate posts just enough to throw the hinges out of square. The gate then catches at the top or bottom of the swing. The fix is re-anchoring the posts with deeper piers, not forcing the hinges. We see this pattern every year and it’s the most common Jerith gate repair we do in this area.
Yes, and in fact Jerith aluminum panels are among the few fence products accepted in defensible-space plans for hillside lots in this Very High Fire Hazard Severity Zone. The panels are noncombustible and meet the six-foot clearance requirements when installed at proper setbacks. What matters most is that any replacement panel or post matches the original product spec so your defensible-space approval stays valid. Call (831) 290-6866 if you’re planning a repair or replacement and we’ll make sure it stays code-compliant.
The root cause is almost always water hitting the bottom rail and hinge welds repeatedly. We adjust sprinkler heads to cut overspray, repair any drainage that pools at the post base, and treat the corroded areas before they spread. For the hinge welds themselves, we replace OEM steel hardware with stainless aftermarket parts that won’t rust out again in two seasons. It’s a simple fix that flatland crews skip because they don’t see canyon moisture doing this to fences.
Service Areas Near Woodland Hills
We service Jerith fencing and gates throughout the surrounding communities. If you’re in Sherman Oaks, we’re the crew for Jerith service in Sherman Oaks. We also handle Jerith service in Brentwood, plus Agoura Hills, Bel Air, and Mission Hills. Most jobs within 20 minutes of Woodland Hills can be scheduled within a few days.
Book Your Jerith Service in Woodland Hills Today
Tell me what you need done. I’ll tell you what it takes and what it costs. Then we get to work. That’s how Isaac Pruett runs every Jerith job, and it’s how we’ve kept Woodland Hills fences standing through heat, wind, and hillside rain. Call (831) 290-6866 to schedule your free estimate.
Written by Isaac Pruett, Owner at Mason Remodeling Co Woodland Hills, serving Woodland Hills since 2004.
