Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Woodland Hills Homeowners Choose Jerith Construction
We provide Jerith in Woodland Hills - independent aluminum fence and gate service across the area, from post re-bedding after hillside soil movement to full custom gate installations on sloping canyon lots. Our crews know the specific failure modes Jerith products develop in this microclimate – adobe clay that rotates posts after winter rain, Santa Ana winds that fatigue hinge pins, and powder coat that pits faster near pool water than the manufacturer’s generic literature suggests. We’re not an authorized Jerith dealer, and we won’t pretend to be. What we are is an independent service provider with enough Jerith-specific repair history in the 91364 and 91367 ZIP codes to know exactly what fails and what fixes it. Call (831) 290-6866 for a free estimate on any Jerith fence or gate issue.
Key Takeaways:
- Independent Jerith aluminum fence and gate specialists serving Woodland Hills, Tarzana, and the west San Fernando Valley
- We repair before we replace – most Jerith gates don’t need a new frame, just new hinges, latch, and re-bedded posts
- Written price before any work starts, every time, no exceptions
- 365-Day Done Right Promise on every Jerith repair and installation
Why Trust Mason Remodeling Co Woodland Hills for Your Jerith Construction?
Jerith aluminum fencing is a specific product category with specific failure patterns, and the crew that shows up needs to know the difference between a Sentinel and an Estate line before they ever touch a post. Our techs have worked on Jerith in Sherman Oaks and across the west Valley long enough to recognize the telltale signs: the slight lean on a hillside post that means the footing is losing grip in expansive soil, the gate that binds at the top hinge because the frame weld is still solid but the hinge pin has worn, the powder coat pitting that starts at the picket-to-rail junction and spreads outward. Isaac Pruett grew up in Los Angeles and trained at Los Angeles Trade-Technical College before spending years on job sites near Warner Center and the surrounding Woodland Hills neighborhoods. He’s seen what these fences do after ten summers of 100-degree heat and what the January rains do to the clay underneath them. We use genuine Jerith powder-matched touch-up and replacement pickets when they’re available, but we don’t upsell you into full sections when a standard 6005-H32 aluminum post and bracket set will handle the structural repair at a fraction of the cost. Every crew member arrives with a name, photo, and uniform verified through the Threshold Standard. You’ll know exactly who’s coming before they get to your door.
Styles & brands we work with
Common Jerith Construction Problems We Fix in Woodland Hills
- Rotated posts on hillside lots. This is the number one Jerith issue we see south of Ventura Boulevard. Woodland Hills sits on expansive adobe clay that swells when wet and shrinks when dry. A Jerith Sentinel or Estate post set in a standard footing will slowly rotate out of plumb as the soil cycles through wet winters and hot, dry summers. The gate still works for a while, then the latch stops lining up and the whole panel starts to bind. Re-bedding the post in a deeper footing with fast-set, high-strength mix usually solves it permanently.
- Gate sag from worn hinge pins. Jerith aluminum gates are lightweight, which is good for operation but means the hinge pins absorb more cyclic loading than people realize. The original equipment hinge pins on Sierra and Estate gates wear over time, especially on double-drive gates that open and close multiple times daily. The gate starts to drop on the latch side, the gap grows at the top, and eventually the latch won’t engage. New adjustable heavy-duty hinge pins and a latch realignment typically restore the gate without touching the frame.
- Powder coat pitting near pool enclosures. Pool Plus fence sections installed close to chlorinated water develop pitting faster than Jerith’s standard coastal or inland lines. The powder coat is tough, but constant micro-splash plus Woodland Hills’ intense UV exposure breaks down the finish at the picket-to-rail junction first. If you catch it early, color-matched touch-up and a clear protective coat stop the corrosion from spreading under the powder. If you ignore it, the aluminum underneath starts to oxidize and the panel eventually needs replacement.
- Latch misalignment after Santa Ana wind events. The Santa Anas don’t just blow leaves around. Sustained 40-50 mph gusts against a Jerith gate put real torque on the posts and the latch hardware. We get calls after every major wind event from Woodland Hills homeowners whose gate suddenly won’t close because the latch receiver has shifted a quarter inch. Usually it’s a simple adjustment – sometimes the post footing has started to move and we’re back to the re-bedding scenario.
- Bottom rail corrosion in sprinkler zones. Jerith aluminum fence installed next to lawns with pop-up sprinklers gets hit with overspray that contains mineral salts. Over years, the bottom rail and picket ends show white oxidation that eats away at the metal. We see this constantly in Woodland Hills yards with automatic irrigation. The fix is replacing the affected sections and adjusting the sprinkler heads so they don’t hit the fence. Aluminum doesn’t rust like steel, but it does corrode, and sprinkler overspray is the main culprit locally.
Jerith Parts & Our Repair-vs-Replace Approach
We use genuine Jerith powder-matched touch-up and replacement pickets whenever they’re available from our local supply network. But here’s the honest truth about Jerith aluminum fencing: the structural components – posts, brackets, rails – are standard 6005-H32 aluminum extrusions that any quality supplier can match. Paying a premium for OEM posts when an aftermarket 6005-H32 post with the same wall thickness does the same job is money that doesn’t need to be spent. We stock the post mix, gate hinge sets, and touch-up coatings specific to Jerith fence systems so we can handle most repairs without waiting on special-order parts. The one component where we always recommend staying with genuine Jerith or a color-matched equivalent is the powder coat finish. Jerith’s coating chemistry is proprietary, and a generic touch-up paint won’t blend or wear the same way. For structural repairs, we replace what’s failed and re-bed what’s shifted. For gate issues, we replace hinges, latch, and posts long before we recommend replacing the gate itself. A frame weld that’s still intact means the gate is still good. We only suggest new gate construction when the weld has actually failed or the frame is bent beyond true. Call (831) 290-6866 and we’ll give you an honest assessment before you spend a dollar.
Our Jerith Service Process – Step by Step
- 1
Diagnosis. We inspect the full fence or gate system, checking post plumb, hinge wear, latch alignment, powder coat condition, and footing integrity. For Woodland Hills hillside properties, this includes checking for signs of soil movement around the posts and any cracking in adjacent hardscape that might indicate the ground itself is shifting.
- 2
Written price. Before any work starts, you get a line-item price in writing. No verbal estimates, no “it’ll probably be around” numbers. The price covers exactly what we’ll do, including parts and labor, and it doesn’t change once work begins unless you add scope.
- 3
Repair or install. Our crew arrives in clean marked uniforms with photo ID badges. For post re-bedding, we excavate the old footing, set the post in fast-set high-strength mix at a deeper depth, and brace it true while it cures. For gate work, we replace worn hinge pins with adjustable heavy-duty sets, re-align the latch, and test the full swing arc. For powder coat touch-up, we clean the affected area, apply color-matched coating, and finish with a protective clear layer.
- 4
Testing and verification. We cycle the gate through its full range multiple times, check every picket and rail for movement, and confirm the latch engages cleanly. You walk the fence with us before we call the job done.
- 5
Written guarantee. Every Jerith repair and installation is covered by our 365-Day Done Right Promise. If something isn’t right within a year of completion, we come back and make it right at no cost to you. The terms are in writing – what’s covered, what’s excluded, and for how long.
See the difference
Before
After
Before
After
Before
AfterJerith Products We Service & Install in Woodland Hills
We service and install the full range of Jerith aluminum fence and gate systems, including the Sentinel Aluminum Fence, Estate Aluminum Fence, Sierra Aluminum Gate, and Pool Plus Fence lines. Most of our Woodland Hills work involves repairing existing Jerith installations rather than full new builds – post re-bedding, hinge replacement, latch realignment, powder coat touch-up, and section replacement where corrosion or damage has gone too far. We also build custom Jerith-style aluminum enclosures for courtyards, garden areas, and pool zones using the same 6005-H32 aluminum stock and fastening methods Jerith uses, so the new work matches the original installation. When you need new fence sections or gates, we can order genuine Jerith product for exact match or fabricate to spec using equivalent materials at lower cost. We’ll show you both options in the written price.
We Also Service These Brands
As a General Contractor, our Woodland Hills crews handle more than Jerith - we also work on KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures as part of our broader remodeling practice. If your property needs fencing work now and you’re planning a kitchen or bath project down the road, you’re talking to a contractor who can handle both without bringing in a new crew you haven’t met.
FAQs – Jerith Construction Service in Woodland Hills
In most cases, yes. A sagging Jerith gate almost always traces back to worn hinge pins or posts that have shifted in the soil, not a failed gate frame. We replace the original hinge pins with adjustable heavy-duty aftermarket sets, re-align the latch, and re-bed the posts if they’ve moved. The only time we recommend replacing the gate is when the frame weld has actually failed or the frame itself is bent. On a sloping Woodland Hills lot off Mulholland, our tech re-bedded a Jerith Estate double-drive gate whose posts had rotated in saturated clay after heavy January rain. We reset both posts in high-strength fast-set mix with deeper footings, replaced the OEM hinge pins with adjustable sets, and re-aligned the latch – restoring a 14-foot opening that had bound shut. The gate frame was fine. Call (831) 290-6866 for an exact assessment and written quote.
Yes, if you catch it before the aluminum underneath starts oxidizing. We clean the affected area, apply Jerith color-matched powder coat touch-up, and seal it with a protective clear layer. That stops the corrosion from spreading under the surrounding powder coat. If the pitting has already eaten through to bare aluminum and the oxidation has spread along the rail, that section typically needs replacement because the coating adhesion is compromised across a wider area than what’s visible. Woodland Hills heat and pool chemicals accelerate this, so we recommend checking the picket-to-rail junctions on your Pool Plus fence every spring. Estimates are free at (831) 290-6866.
A properly installed Jerith fence handles Santa Ana winds well because aluminum flexes without cracking, but the weak point is always the post footing. Woodland Hills hillside soil – particularly the adobe clay common south of Ventura Boulevard – doesn’t grip posts the way denser flatland soil does. When winds hit sustained 40-50 mph gusts, the torque on the fence transfers to the posts, and if the footings are shallow or the soil has dried and contracted around them, the posts start to rotate. The fix is deeper footings, sometimes with a wider diameter, set in high-strength mix. We also recommend checking post plumb after major wind events. A small shift caught early is a simple re-bed. A shift left for a year can rack the entire fence line.
Adding a spa changes your pool barrier requirements under California Building Code because the spa is a separate body of water with its own access points. Your existing Pool Plus fence may need additional sections to enclose the spa area, a new self-closing, self-latching gate if the spa has its own entry, and possibly height adjustments depending on how the spa is positioned relative to the fence and the house. We can inspect your current installation, identify exactly what the updated code requires for your specific layout, and give you a written price for the additional Jerith-compatible sections and gate hardware. Call (831) 290-6866 and we’ll walk the property with you.
Yes. We build custom aluminum enclosures using the same 6005-H32 aluminum stock and fastening methods Jerith uses, so a new courtyard or garden fence matches your existing Jerith installation in profile, color, and hardware. For Woodland Hills properties with tight canyon lots and zero-lot-line setbacks, custom fabrication often makes more sense than stock panels because we can cut sections to fit unusual angles and grade changes without leaving gaps. We’ll show you both the custom fabrication price and the genuine Jerith product price in the written estimate so you can compare.
Here are the price ranges for the Jerith work we do most often in Woodland Hills:
| Service | Price Range |
|---|---|
| Jerith gate post re-bedding (per post) | $400 – $900 |
| Aluminum fence panel reset or rack repair (per 6-ft section) | $250 – $600 |
| Custom Jerith-style aluminum gate installation (single) | $1200 – $3500 |
These ranges cover typical Woodland Hills conditions – hillside access, clay soil, and existing Jerith product. Your specific job may fall outside these numbers depending on how many posts need re-bedding, the length of fence involved, and access difficulty. Call (831) 290-6866 for an exact quote. Estimates are free and the price we give you is the price you pay.
Book Your Jerith Service in Woodland Hills, CA
Tell me what you need done. I’ll tell you what it takes and what it costs. Then we get to work. Call (831) 290-6866 for a free Jerith fence or gate estimate in Woodland Hills. A live person answers, day or night, and your written price arrives before any work begins.
Written by Isaac Pruett, Owner at Mason Remodeling Co Woodland Hills, serving Woodland Hills since 2004.
