Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Paver Driveway Installation Cost in Woodland Hills?
Paver driveway installation in Woodland Hills typically runs $7,000 to $18,000 for a standard two-car driveway of roughly 400 to 600 square feet. Most homeowners in the area land between $9,500 and $14,000 for a mid-grade paver with a proper base, edge restraint, and sealing. The range shifts based on the paver material you choose, the condition of the existing surface, site access, and whether you add features like borders, steps, or a walkway to the front entry.
Paver Driveway Installation Cost Breakdown (2026)
Here’s the line-by-line math for a typical paver driveway project in Woodland Hills. These numbers reflect what we see on jobs across the 91364, 91367, and 91303 zip codes in 2026, not a national average pulled from a database.
| Cost Component | Typical Range | What It Covers |
|---|---|---|
| Demolition & removal of existing driveway | $1,500 – $3,500 | Breaking out old concrete or asphalt, hauling debris, disposing at a licensed facility |
| Excavation & grading | $800 – $2,200 | Digging to 8 – 10 inches below finished grade, rough grading for drainage slope |
| Base material (gravel + sand) | $1,200 – $3,000 | Compacted aggregate base (typically Class II road base) plus bedding sand |
| Paver material | $2,500 – $8,000 | Depends on paver type: standard concrete pavers run $4 – $7/sq ft; premium clay brick or natural stone runs $12 – $22/sq ft |
| Edge restraint & joint sand | $300 – $800 | Plastic or aluminum edging, polymeric sand to lock joints and deter weeds |
| Compaction & finishing | $400 – $900 | Plate compaction, final leveling, sweeping sand into joints |
| Sealing (optional) | $1 – $3 per sq ft | Clear or wet-look sealer; extends paver life and resists oil stains |
Total typical range: $7,000 – $18,000 for a standard two-car driveway. Add a walkway to the front door? Budget another $2,500 to $5,000. Add a small retaining wall along a sloped edge? That can push the job to $20,000+ depending on wall height and length.
What changes the number most is the paver itself. A basic tumbled concrete paver from a regional supplier keeps material costs low. A clay brick paver or a travertine-style paver imported from a quarry jumps the material line item fast. At Mason Remodeling, we carry Belgard, Unilock, and Techo-Bloc pavers because those manufacturers publish real specifications, not just marketing brochures. That means you know the compressive strength and color-fastness rating before a single paver is ordered.
For reference, here’s how paver driveways compare to other driveway options in Woodland Hills:
- Concrete driveway installation: $4,500 – $12,000
- Asphalt driveway paving: $3,500 – $9,000
- Paver driveway installation: $7,000 – $18,000
- Full driveway replacement (any material): $5,000 – $14,000
- Driveway sealing (maintenance): $250 – $700
Pavers cost more up front than poured concrete or asphalt. What you’re buying is a surface that won’t crack the way a concrete slab does in Woodland Hills. Our soil here expands and contracts with seasonal moisture shifts. A monolithic slab has no give. Pavers have thousands of individual joints that flex with the ground. When one paver settles, you lift it, add sand, and reset it. When a slab settles, you replace the slab.
What Affects Paver Driveway Installation Pricing in Woodland Hills
No two driveways cost the same, even on the same street. Here’s what moves the number on a Woodland Hills job:
- Site access and slope. Driveways on the hillside lots south of Ventura Boulevard are often narrow at the street and steep at the approach. That means more hand work, which means more labor hours. Crews can’t always get a skid steer into a tight canyon-side driveway, so gravel and pavers get moved by wheelbarrow or a small dingo. Steep grades also need additional base compaction and sometimes a retaining course at the street edge.
- Paver material and thickness. Standard 60mm concrete pavers work for residential driveways. But if you own a heavier vehicle or want a higher-end look, an 80mm paver from Techo-Bloc or a clay brick from a national maker will push material costs noticeably higher. Clay brick pavers can run two to three times the cost of concrete pavers per square foot.
- Existing driveway removal. If the current driveway is thick reinforced concrete, demolition costs go up. Concrete with wire mesh or rebar takes longer to break and haul. An old asphalt driveway comes out faster and often costs less to remove.
- Drainage requirements. Woodland Hills gets most of its rain in a short winter window, and some neighborhoods sit in hillside drainage paths. If the project needs a channel drain, a French drain, or a re-graded slope to move water away from the foundation, that’s an additional $1,500 to $4,000 depending on length and depth. This is not the place to save money. Water against a foundation in a hillside home is a slow, expensive problem.
- Permits and HOA requirements. Many Woodland Hills neighborhoods have HOAs with specific paver color and pattern rules, and some require permeable pavers to comply with LA County stormwater ordinances. Permeable paver systems cost more than standard pavers because of the specialized base and joint material. If your project needs a permit, the City of Los Angeles Department of Building and Safety may require a site plan and a drainage review, which adds time and a few hundred dollars in fees.
- Edging, borders, and inlays. A simple single-color driveway with no border is the baseline. Add a contrasting border course around the perimeter and the labor line moves up. Add a herringbone or basketweave pattern instead of a running bond and the installer spends more time cutting and fitting. Add an inlay with a contrasting color and you’ve added both material and layout time.
Paver Types and What They Cost in Woodland Hills
At the risk of oversimplifying, you have three tiers of paver material. Here’s what each costs per square foot installed in this market, and what you’re actually getting:
Standard Concrete Pavers: $12 – $18 per sq ft installed
This is the workhorse category. Brands like Belgard’s Dublin Cobble or Unilock’s Town Hall fall here. Concrete pavers are molded under pressure, colored through the body (not just on the surface), and have a compressive strength around 8,000 PSI. For a 500-square-foot driveway, expect a total project cost of $7,000 to $11,000 including demo, base, and installation. This is where most Woodland Hills homeowners land.
Premium Concrete Pavers: $18 – $25 per sq ft installed
Think Techo-Bloc’s Blu 60 or Belgard’s Catalina line. These have more refined color blends, more realistic stone textures, and often larger format options that reduce the number of joints. For the same 500-square-foot driveway, you’re looking at $11,000 to $15,000. The difference is mostly visual: deeper colors, less repetitive patterns, and a surface that reads closer to natural stone.
Clay Brick Pavers: $22 – $35 per sq ft installed
Real clay brick, fired in a kiln, has been used for paving for centuries for a reason. The color is permanent because it goes all the way through the fired clay. Brands like Pine Hall Brick and Whitacre Greer are the standard-bearers. A 500-square-foot clay brick driveway in Woodland Hills runs $13,000 to $18,000 or more. Clay brick also requires less sealing over its life because the surface is already dense. For homes in the older sections of Woodland Hills south of the Boulevard where architectural consistency matters, clay brick is often the right call.
Woodland Hills Specific Notes on Paver Driveways
We’ve installed paver driveways from the flat lots of the Valley floor up into the hillside streets above Mulholland. Here’s what homeowners here should know before they sign a contract.
Soil movement is real. The clay-heavy soils in much of Woodland Hills expand when wet and shrink when dry. That movement is the primary reason standard concrete slabs crack here. Pavers handle it better than any rigid surface. But the base has to be right. We compact in lifts, not all at once, and we use a geotextile fabric under the base on clay-heavy lots. Skip the fabric on the wrong soil and the base gradually migrates into the clay, leaving hollow spots under the pavers.
Fire zone requirements matter. Parts of Woodland Hills sit in a designated Fire Hazard Severity Zone. That doesn’t change your driveway material choice directly, but it does affect what you can plant along the driveway edge and how much clearance you need for fire equipment. If your driveway is long and climbs a slope, width and turn radius requirements for fire trucks may limit how much of the grade you can dedicate to decorative borders.
Summer heat is a surface temperature issue. Dark pavers absorb heat. In August, a charcoal paver driveway in Woodland Hills can hit 150 degrees on the surface. Lighter colors run cooler, which matters if you walk barefoot to get the mail or if you have pets. Sealer choice also matters. A wet-look sealer makes colors richer but can increase surface temperature slightly. A penetrating matte sealer protects without the heat gain.
The Boulevard effect. Homes along Ventura Boulevard and the commercial corridors may have different setback and driveway width requirements than residential streets. If your paver project touches the sidewalk or the apron where the driveway meets the street, the City of Los Angeles has jurisdiction over that section. We handle the permitting and inspection coordination, but you should know it can add a week or two to the timeline.
How to Save on Paver Driveway Installation
You can reduce the cost of a paver driveway without cutting corners that will cost you later. Here’s where real savings live:
- Choose a standard concrete paver in a common color. Custom colors and premium finishes add cost. Stock colors ship from local distribution yards, not from a factory on a longer lead time. That saves on both material and freight.
- Keep the pattern simple. A running bond or basic herringbone installs faster than a complex pattern with multiple borders. Labor is the single largest line item, and pattern complexity drives labor hours.
- Reuse your existing base if it’s in good shape. If the current driveway is asphalt with a solid gravel base, sometimes the base can be salvaged with less new material brought in. That only works if the existing base is clean and properly graded. We’ll tell you honestly if it isn’t.
- Phase the project. If your budget is tight, do the main driveway now and add a walkway or a paver entry pad in a second phase. You’ll pay slightly more in total mobilization than doing it all at once, but it spreads the cash out.
- Get a written price before you commit. At Mason Remodeling, we deliver a written price before any work starts. Every time. Not a verbal estimate that grows on the final bill. The number you see is the number you pay. If the scope doesn’t change, the price doesn’t change. That’s how it should work.
Want a specific number for your Woodland Hills driveway? Call (831) 290-6866 and we’ll put together a written estimate based on measurements of your actual site. Estimates are free, and you’ll get the name and photo of the technician who will come out to measure before they arrive.
FAQs: Paver Driveway Installation Cost in Woodland Hills
How much does a paver driveway cost per square foot in Woodland Hills?
Installed paver driveway costs in Woodland Hills run $14 to $25 per square foot for standard and premium concrete pavers, and $22 to $35 per square foot for clay brick pavers. That includes demolition, excavation, base, pavers, edge restraint, and joint sand. A 500-square-foot driveway at $18 per square foot is a $9,000 project. Call (831) 290-6866 for an exact per-square-foot quote based on your site.
Is a paver driveway cheaper than concrete in Woodland Hills?
No. Paver driveways cost 50% to 100% more than poured concrete up front. A concrete driveway in Woodland Hills runs $4,500 to $12,000. Pavers run $7,000 to $18,000 for the same footprint. The tradeoff is longevity and repairability: pavers don’t crack the way slabs do on our expansive clay soil, and individual pavers can be reset if settling occurs. Over a 25-year span, the numbers get closer when you factor in crack repairs and eventual concrete replacement.
How long does paver driveway installation take in Woodland Hills?
A standard two-car paver driveway takes 5 to 8 working days from demolition to final compaction in Woodland Hills. Projects that include a walkway, retaining wall, or drainage work can run 2 to 3 weeks. Permitting with the City of Los Angeles, if required, adds lead time before work begins. We give you a written schedule with your written price, so you know the plan before anyone shows up.
Do paver driveways need a permit in Woodland Hills?
Most paver driveway replacements on an existing footprint do not require a building permit in Woodland Hills. However, if you’re expanding the driveway width, changing the apron at the street, adding significant hardscape that affects drainage, or your HOA has review authority, a permit or approval may be required. Some hillside lots in the City of Los Angeles also trigger a grading review. We check this during our site visit and handle the paperwork if it’s needed. Call (831) 290-6866 with your address and we’ll verify what applies to your property.
How much does it cost to seal a paver driveway in Woodland Hills?
Paver driveway sealing costs $1 to $3 per square foot in Woodland Hills, which translates to $500 to $1,500 for a standard two-car driveway. Sealing is recommended every 3 to 5 years depending on sun exposure and traffic. A quality sealer protects against oil stains, slows color fading from UV exposure, and helps lock joint sand in place. It’s the single highest-value maintenance step for a paver driveway.
Can Mason Remodeling install a paver driveway in Woodland Hills?
Yes. Mason Remodeling has provided paver driveway installation in Woodland Hills since 2004, and we carry specification-grade pavers from Belgard, Unilock, and Techo-Bloc. Every crew member is background-checked and identity-verified under The Threshold Standard. You receive the name and photo of your technician before the visit, and the technician shows a photo ID badge at the door. Your price is in writing before work starts, and every project is covered by our 365-Day Done Right Promise: if the work isn’t right within a year of completion, we make it right at no cost to you. Call (831) 290-6866 for a free estimate.
Our Process: What to Expect When You Call
We’re protective about who enters your home, because you should be too. Here’s how a paver driveway project with Mason Remodeling works:
- You call (831) 290-6866. A live person answers. Every time. 24 hours a day, 7 days a week, including holidays. No phone tree, no voicemail loop, no “we’ll call you back on Monday.”
- We schedule a site visit. Before the technician arrives, you get their name and photo. At the door, they’re in a clean marked uniform and they’ll show you a photo ID badge before they step inside.
- We measure and assess. The technician evaluates the existing driveway, checks site access, reviews drainage conditions, and discusses paver options with you. That’s when we talk through the material tiers and what fits your budget.
- You get a written price. Before any work begins, you receive a written price covering the full scope. Not an estimate. Not a range. A written price. If the scope changes during the project, we discuss the change with you and agree on a written adjustment before that work proceeds.
- Installation happens on schedule. Our crew handles demo, base prep, paver installation, and finishing. We protect your landscaping and clean the site daily. The crew lead updates you on progress and any conditions they encounter.
- You get a written guarantee. Every project is covered by our 365-Day Done Right Promise. Coverage terms are stated plainly: what’s covered, what’s excluded, and for how long. If something isn’t right within 365 days from the completion date, we return and fix it at no charge. No dispute process, no conditions, no fine print runaround.
We built this process because homeowners in Woodland Hills told us what they actually worry about. It’s not just the price. It’s whether the crew is who they say they are. It’s whether the invoice will match the estimate. It’s what happens if something goes wrong six months later. We answer those questions in writing before the first tool is unpacked.
Ready for a written estimate on your paver driveway? Call (831) 290-6866 today. Get a free site assessment, a clear material comparison, and a written price with no obligation.
Written by Isaac Pruett, Owner at Mason Remodeling Co Woodland Hills, serving Woodland Hills since 2004.
Pricing reflects the Woodland Hills market as of 2026. Mason Remodeling Co Woodland Hills offers free estimates – call (831) 290-6866.
What Our Customers Say
"Very respectful in the house. Shoe covers every day and a cleanup every evening."
- Alma V."Great quality tile work. The countertop template slipped by a week, but the project lead explained and kept us updated."
- Susan Y."Good work on the hall bath. They found a rotted subfloor, which added cost, but showed me photos and a clear price first."
- Neil P.
